CN015RZ-3012-0 Datasheet, PDF (1/2 Pages) Yamaichi Electronics Co., Ltd. – Direct Mounting, Self Tapping Screw SMT Fixing

Card
Connectors
Series CN015 - Type 30
Direct Mounting, Self Tapping Screw (w/o Ejector)
Specifications
Insulation Resistance: 1,000MΩ min. at 500V DC
Withstanding Voltage: 500V AC rms for 1 minute
Contact Resistance:
40mΩ max. (initial resistance) excluding

conductor resistance of terminal (25mΩ)
Voltage Rating:
250V AC
Current Rating:
0.5A
Operating Temp. Range: –20°C to +60°C
Materials and Finish
Contact:
PB / Ni-Au
Insulator Base: PA, black
Features
 SMT type terminals
 Acceptable for automation mounting machine
 Space saving design and low profile 4.0mm design
Type 30 with Self Tapping Screw (CN015RZ-3012-0)
PCB Mounting:
Type 2 (Self Tapping) = ∅1.44
Part Number (Details)
CN015
RZ - 30 1 2 - *
Series No.
RZ = 3.3V for
SmartMedia Card (3.3V)
Type 30
PCB Mounting: 2 = Self Tapping Screw

(Screw ∅1.7mm See Note 1)
Height of Stand-off: ***)
0 = A(0.30mm), B(4.00mm), C(2.00mm)
2 = A(2.00mm), B(5.70mm), C(3.70mm)
***) Dimensions A, B and C are shown in drawings below.
Recommended PCB Layout (CN015RZ-3012-0)
Top View
(Self Tapping)
Type 30 with Self Tapping Screw (CN015RZ-3012-2)
Recommended PCB Layout (CN015RZ-3012-2)
Dimensions for CN015RZ-3012-2 are the same as above only the
self tapping srew hole distance is different and 2.00mm stand-off
Card Insertion Details
Info:
The Switch should be open when card is not inserted,
and should be closed when card is inserted
Note 1:
Use self tapping screw from the back side of 1.7mm or more (PCB thickness +2.0mm).
– Binding torque 1.28gfcm (0.118N ^. m) or less
– Repeated binding number = 5 times or less
Function Table
Part Number
CN015RZ-3012-0
CN015RZ-3012-2
Voltage of
SmartMedia
3.3V
Ejector
No
Mis-insertion
Protection
No
Sequential
Contact
Yes
Write Protection
Switch
Yes
Connectors
SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER