CN015RZ-2001-0 Datasheet, PDF (1/2 Pages) Yamaichi Electronics Co., Ltd. – Direct Mounting, Screw Fixing SMT Fixing

Series CN015 - Type 20
Direct Mounting, Screw Fixing (with Ejector)
Card
Connectors
Specifications
Insulation Resistance: 1,000MΩ min. at 500V DC
Withstanding Voltage: 500V AC rms for 1 minute
Contact Resistance:
40mΩ max. (initial resistance)

excluding conductor resistance

of terminal (25mΩ)
Voltage Rating:
250V AC
Current Rating:
0.5A
Operating Temp. Range: –20°C to +60°C
Materials and Finish
Contact:
PB / Ni-AU
Insulator Base: PPS
Features
 Realizing smooth extraction of SmartMedia by ejection function
 Stand-off types are available to mount components under
the body of CN015
 Adapting sequential method to secure data protection
by contacting
in the order of Ground-Power-Signal correctly
Part Number (Details)
CN015
*Z
Series No.
- 20 0 1 - *
Applications:
RZ = 3.3V for SmartMedia
Card (3.3V)
PZ = 3.3V / 5V for SmartMedia
Card (3.3V) and (5V)
Type 20
PCB Mounting: 1 = Screw Lock Type

(Screw ∅2.2mm See Note 1)

Height of Stand-off: ***)
0 = A(0.00mm), B(4.80mm), C(2.80mm)
1 = A(2.00mm), B(6.80mm), C(4.80mm)
***) Dimensions A, B and C are shown in drawings below.
Type 20 with Screw Lock
PCB Mounting:
Type 1 (Screw Lock) = ∅2.20
Recommended PCB Layout
Top View
4-∅2.20 (Screw Lock)
Function Table
Part Number
CN015RZ-2001-0
CN015RZ-2001-1
CN015PZ-2001-0
CN015PZ-2001-1
Voltage of
SmartMedia
3.3V
3.3V / 5V
Ejector
Yes
Yes
Note 1:
Recommended screw - M2.0 x length (thickness of PC board
thickness of flange +2.0mm)
Special notice for operation:
Never soak and wash after soldering. There are cases where SmartMedia
can not be smoothly inserted because of flux remaining inside of the
connector, after washing. Wash only part of the connector terminal on PC board.
Mis-insertion
Protection
Yes
Sequential
Contact
Yes
Write Protection
Switch
Yes
No
Yes
Yes
SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER
Connectors