|
YMF753 Datasheet, PDF (10/26 Pages) YAMAHA CORPORATION – AC97 Revision2.2 Audio CODEC with Digital Audio I/F | |||
|
◁ |
YMF753
20h : General Purpose (Read/Write, Default: 0000h)
D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0
POP - 3D -
-
- MIX MS LPBK -
-
-
-
-
-
-
POP...............This bit selects whether PCM (DAC) output is gone through the 3D and Tone (Bass / Treble) or
not.
â0â : PCM (DAC) output is gone through the 3D and Tone.
â1â : PCM (DAC) output is bypassed the 3D and Tone.
3D .................This bit selects whether 3D enhancement is used or not.
â0â : Off
â1â : On
MIX ..............This bit selects the output to MONO_OUT(No.37).
â0â : All mixing sources are output to MONO_OUT.
â1â : The microphone input is output to MONO_OUT.
MS ................This bit selects either MIC1 or MIC2 for the microphone input.
â0â : MIC1 (No.21)
â1â : MIC2 (No.22)
LPBK............This bit selects data to the D/A converter.
â0â : Data from the AC-Link
â1â : Loopback from A/D converted data
22h : 3D Control (Read/Write, Default: 0000h)
D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0
-
-
-
-
WD3-1
-
-
-
-
-
-
-
-
-
WD3-1 ..........These bits determine the wide level of 3D enhancement (wide stereo). The wide range is from
0% to 100%. When all bits are set to â0â, wide level is 0% and when all bits are set to â1â, wide
level is 100%.
10
March 6, 2001
|
▷ |