|
CC0603KRX5R7BB105 Datasheet, PDF (9/18 Pages) YAGEO Corporation – SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS | |||
|
◁ |
Product specification 9
Surface Mount Multilayer Ceramic Capacitors General Purpose & High Cap. X5R 4 V to 50 V 18
ELECTRICAL CHARACTERISTICS
X5R DIELECTRIC CAPACITORS; NISN TERMINATIONS
Unless otherwise specified, all tests and measurements shall be made under standard atmospheric conditions
for testing as given in 5.3 of IEC 60068-1:
- Temperature: 15 °C to 35 °C
- Relative humidity: 25% to 75%
- Air pressure: 86 kPa to 106 kPa
Before the measurements are made, the capacitor shall be stored at the measuring temperature for a time
sufficient to allow the entire capacitor to reach this temperature.
The period as prescribed for recovery at the end of a test is normally sufficient for this purpose.
Table 6
DESCRIPTION
VALUE
Capacitance range
Capacitance tolerance
Dissipation factor (D.F.)
10 nF to 100 µF
±10% and ±20%
6.3 V
Exception: 0402 ⥠180 nF;
0201 ⥠12 nF;
0805 ⥠1 µF;
1210 ⥠22 µF
0402 ⥠330 nF;
1206 ⥠22 µF;
0603 ⥠2.2 µF;
1210 ⥠100 µF
⤠5%
⤠7%
⤠10%
10 V
Exception: 0402 ⥠180 nF; 0805 ⥠1 µF;
1206 ⥠6.8 µF
0201 ⥠100 nF; 0402 ⥠330 nF; 0603 ⥠1 µF;
0805 ⥠2.2 µF; 1206 ⥠10 µF; 1210 ⥠10 µF
⤠5%
⤠7%
⤠10%
16 V
Exception: 0402 ⥠180 nF; 0603 ⥠680 nF; 0805 ⥠1 µF
0402 ⥠330 nF; 0603 ⥠2.2 µF; 0805 ⥠10 µF
1206 ⥠10 µF; 1210 ⥠10 µF
⤠5%
⤠7%
⤠10%
⥠25 V
Exception: 0402 ⥠27 nF;
1206 ⥠4.7 µF;
0603 ⥠220 nF;
1210 ⥠10 µF
0805 ⥠2.2 µF;
⤠3.5%
⤠5%
0402 ⥠180 nF
0805 ⥠4.7 µF;
Insulation resistance after 1 minute at Ur (DC)
Maximum capacitance change as a function of temperature
(temperature characteristic/coefficient):
Operating temperature range:
⤠7%
1206 ⥠10 µF
⤠10%
Rins ⥠10 G⦠or Rins à Cr ⥠500 seconds whichever is less
±15%
â55 °C to +85 °C
Feb 10, 2012 V.12
www.yageo.com
|
▷ |