YC124-JR-0710KL Datasheet, PDF (8/9 Pages) YAGEO Corporation – ARRAY CHIP RESISTORS

Chip Resistor Surface Mount ^{YC/TC SERIES 124 (RoHS Compliant)}
Product specification 8
9
TEST
Solderability
- Wetting
TEST METHOD
PROCEDURE
REQUIREMENTS
IPC/JEDECJ-STD-002B test B
IEC 60068-2-58
Electrical Test not required
Magnification 50X
SMD conditions:
1^st step: method B, aging 4 hours at 155 °C
dry heat
2^nd step: leadfree solder bath at 245±3 °C
Dipping time: 3±0.5 seconds
Well tinned (≥95% covered)
No visible damage
- Leaching
- Resistance to
Soldering
Heat
IPC/JEDECJ-STD-002B test
D
IEC 60068-2-58
MIL-STD-202G-method
210F
IEC 60068-2-58
Leadfree solder, 260 °C, 30 seconds
immersion time
Condition B, no pre-heat of samples
Leadfree solder, 270 °C, 10 seconds
immersion time
Procedure 2 for SMD: devices fluxed and
cleaned with isopropanol
No visible damage
±(1%+0.05 Ω)
<50 mΩ for Jumper
No visible damage
Mar 09, 2011 V.3
www.yageo.com