CC0201BRNPO7BN121 Datasheet, PDF (3/14 Pages) YAGEO Corporation – SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS

Surface-Mount Ceramic Multilayer Capacitors ^{General Purpose}
NP0
Product specification ₃
16 V to 50 V
14
CONSTRUCTION
The capacitor consists of a
rectangular block of ceramic
dielectric in which a number of
interleaved metal electrodes
are contained. This structure
gives rise to a high capacitance
per unit volume.
The inner electrodes
are connected to the two
end terminations
and finally covered with a layer
of plated tin (NiSn). The
terminations are lead-free.
A cross section of the structure
is shown in Fig.1.
Fig. 1 Surface mounted multilayer ceramic capacitor construction
DIMENSION
Table 1 For outlines see fig. 2
TYPE L₁ (mm)
0201
0402
0603
0805
1206
1210
1812
0.6 ± 0.03
1.0 ± 0.05
1.6 ± 0.10
2.0 ± 0.10 ⁽¹⁾
2.0 ± 0.20 ⁽²⁾
3.2 ± 0.15 ⁽¹⁾
3.2 ± 0.30 ⁽²⁾
3.2 ± 0.20
4.5 ± 0.20
W (mm)
0.3 ± 0.03
0.5 ± 0.05
0.8 ± 0.10
1.25 ± 0.10 ⁽¹⁾
1.25 ± 0.20 ⁽²⁾
1.6 ± 0.15 ⁽¹⁾
1.6 ± 0.20 ⁽²⁾
2.5 ± 0.20
3.2 ± 0.20
T (MM)
L₂ / L₃ (mm) L₄ (mm)
min. max.
min.
0.10 0.20
0.20
0.20 0.30
0.40
0.20 0.60
0.40
Refer to ^{0.25 0.75}
0.55
table 2 to 5
0.25 0.75
1.40
0.25 0.75
1.40
0.25 0.75
2.20
NOTE
1. Dimension for size 0805 and 1206, C ≤ 1 nF
2. Dimension for size 0805 and 1206, C > 1 nF
OUTLINES
For dimension see Table 1
Fig. 2 Surface
mounted multilayer ceramic c
apacitor dimension
Nov. 24, 2016 V.15
www.yageo.com