AF122-FR-071RL Datasheet, PDF (3/8 Pages) YAGEO Corporation – ANTI-SULFURATED CHIP RESISTORS

Product specification 3
Chip Resistor Surface Mount
AF
SERIES 122/124/162/164 (RoHS Compliant)
8
MARKING
AF122 / 162
Fig. 1
AF124 / 164
No marking
0
Fig. 2 Value = 0Ω
3 60
Fig. 3 Value = 316KΩ
I-Digit marking
1% E-24/E-96: R≧ 100Ω 4digits
First three digits for significant figure and 4th digit for number of zeros
Fig. 3 Value = 240KΩ
5% E-24: R≧ 10Ω
First two digits for significant figure and 3rd digit for number of zeros
For further marking information, please refer to data sheet “Chip resistors marking”.
CONSTRUCTION
The resistor is constructed on top
of a high-grade ceramic body.
Internal metal electrodes are added
on each end to make the contacts to
the thick film resistive element. The
composition of the resistive element
is a noble metal embedded into a
glass and covered by a glass. The
resistor is laser trimmed to the
rated resistance value. The resistor
is covered with a protective epoxy
coat, finally the external
terminations (matte tin on Ni-
barrier) are added as shown in Fig.4.
OUTLINES
Fig. 4 Chip resistor outlines
DIMENSIONS
Table 1
TYPE
AF122
B (mm)
0.24± 0.10
H (mm) 0.30+0.10/-0.05
H1 (mm)
P (mm)
L (mm)
T (mm)
---
0.67± 0.05
1.00± 0.10
0.30± 0.10
W1 (mm)
0.25± 0.10
W2 (mm)
1.00± 0.10
AF124 AF162
0.25± 0.15 0.35±0.10
0.45± 0.05 0.30±0.10
0.30± 0.05
--
0.50± 0.05 ^0.80±0.05
2.00± 0.10 ^1.60±0.10
0.45± 0.10 ^0.40±0.10
0.30± 0.15 ^0.30±0.10
1.00± 0.10 ^1.60±0.10
AF164
0.35± 0.15
0.65± 0.05
0.50± 0.15
0.80± 0.05
3.20± 0.15
0.60± 0.10
0.30± 0.15
1.60± 0.15
Jun. 28, 2016 V.4
For dimension, please refer to Table 1
AF122 / 162
AF124 / 164
Fig. 5 AF122/124/162/164 series chip resistors dimension
www.yageo.com