RC0805JR-0710RL Datasheet, PDF (2/8 Pages) YAGEO Corporation – HIGH OHMIC CHIP RESISTORS RC high ohmic series

Chip Resistor Surface Mount
RC-High ohmic SERIES
Product specification 2
0805/1206 (RoHS Compliant)
8
SCOPE
This specification describes
RC0805/1206 high ohmic chip
resistors with lead-free terminations
made by thick film process.
APPLICATIONS
All general purpose application
FEATURES
RoHS compliant
- Products with lead free
terminations meet RoHS
requirements
- Pb-glass contained in electrodes,
resistor element and glass are
exempted by RoHS
Reducing environmentally
hazardous wastes
High component and
equipment reliability
Saving of PCB space
None forbidden-materials used
in products/production
Halogen Free Epoxy
ORDERING INFORMATION - GLOBAL PART NUMBER & 12NC
Both part numbers are identified by the series, size, tolerance, packing
type, temperature coefficient, taping reel and resistance value.
YAGEO BRAND ordering code
GLOBAL PART NUMBER (PREFERRED)
RC XXXX X X X XX XXXX L
(1) (2) (3) (4) (5) (6) (7)
(1) _SIZE
0805
1206
(2) _TOLERANCE
J = ±5%
K = ±10%
M= ±20%
(3) _{PACKAGING TYPE}
R = Paper taping reel
(4) _{TEMPERATURE COEFFICIENT OF RESISTANCE}
– = Base on spec
(5) _{TAPING REEL}
07 = 7 inch dia. Reel
10 = 10 inch dia. Reel
13 = 13 inch dia. Reel
(6) _{RESISTANCE VALUE}
There are 2~4 digits indicated the resistor value. Letter M is decimal point, no need to
mention the last zero after M, e.g. 24M not 24M0.
Detailed resistance rules show in table of “Resistance rule of global part number”.
(7) OPTIONAL CODE
L = optional symbol ^(Note)
Resistance rule of global part
number
Resistance code rule
Example
XXMX
10M = 10 x 10⁶ Ω
(10 to 97.6 MΩ) 97M6 = 97.6 x 10⁶ Ω
XXXM
100M =100 x 10⁶ Ω
(100 to 220 MΩ) 220M = 220 x 10⁶ Ω
ORDERING EXAMPLE
The ordering code of a RC0805
chip resistor, value 100 MX with
±5% tolerance, supplied in 7-inch
tape reel is: RC0805JR-07100M(L).
NOTE
1. All our RSMD products meet RoHS compliant. "LFP" of the internal 2D reel label
mentions "Lead Free Process"
2. On customized label, "LFP" or specific symbol printed and the optional "L" at the end of
GLOBAL PART NUMBER / 12NC can be added (both are on customer request)
Dec 31, 2008 V.0
www.yageo.com