NP0402 Datasheet, PDF (16/23 Pages) YAGEO Corporation – SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS

Surface-Mount Ceramic Multilayer Capacitors
Mid-voltage
NP0/X7R
Product specification 16
23
100 V to 630 V
ELECTRICAL CHARACTERISTICS
NP0/X7R DIELECTRIC CAPACITORS; NISN TERMINATIONS
Unless otherwise specified, all test and measurements shall be made under standard atmospheric conditions
for testing as given in 5.3 of IEC 60068-1:
- Temperature: 15 °C to 35 °C
- Relative humidity: 25% to 75%
- Air pressure: 86 kPa to 106 kPa
Before the measurements are made, the capacitor shall be stored at the measuring temperature for a time
sufficient to allow the entire capacitor to reach this temperature.
The period as prescribed for recovery at the end of a test is normally sufficient for this purpose.
Table 14
DESCRIPTION
VALUE
Capacitance range
Capacitance tolerance
0.47 pF to 1 µF
NP0
C < 10 pF
C ≥ 10 pF
X7R
Dissipation factor (D.F.)
±0.25 pF, ±0.5 pF
±2%, ±5%
±5% ⁽¹⁾, ±10%
NP0
C < 30 pF
C ≥ 30 pF
X7R
Insulation resistance after 1 minute at U_r (DC)
Maximum capacitance change as a function of temperature
(temperature characteristic/coefficient):
NP0
X7R
≤ 1 / ( 400 + 20C )
≤ 0.1 %
≤ 2.5 %
R_ins ≥ 10 GΩ or R_ins × C ≥ 500 seconds whichever is less
±30 ppm/°C
±15%
Operating temperature range:
NP0/X7R
–55 °C to +125 °C
NOTE
1. Capacitance tolerance ±5% doesn't available for X7R full product range, please contact local sales force before order
Feb 02, 2012 V.9
www.yageo.com