CX1210MKX7R7BB105 Datasheet, PDF (10/20 Pages) YAGEO Corporation – SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS

Product specification 10
Surface-Mount Ceramic Multilayer Capacitors ^{General Purpose & High Cap.} X7R 6.3 V to 50 V ²⁰
ELECTRICAL CHARACTERISTICS
X7R DIELECTRIC CAPACITORS; NISN TERMINATIONS
Unless otherwise specified, all test and measurements shall be made under standard atmospheric conditions
for testing as given in 5.3 of IEC 60068-1:
- Temperature: 15 °C to 35 °C
- Relative humidity: 25% to 75%
- Air pressure: 86 kPa to 106 kPa
Before the measurements are made, the capacitor shall be stored at the measuring temperature for a time
sufficient to allow the entire capacitor to reach this temperature.
The period as prescribed for recovery at the end of a test is normally sufficient for this purpose.
Table 7
DESCRIPTION
VALUE
Capacitance range
100 pF to 22 µF
Capacitance tolerance
Dissipation factor (D.F.)
±5%, ±10%, ±20%
≤ 10 V
Exception: 0201 ≥ 12 nF;
1210 ≥ 4.7 µF
0603 ≥ 2.2 µF; 0805 ≥ 4.7 µF;
≤ 5%
≤ 10%
0805 ≥ 10 µF; 1206 ≥ 10 µF
16 V
Exception: 0201 ≥ 1.5 nF; 0402 ≥ 27 nF; 0603 ≥ 220 nF;
0805 ≥ 680 nF; 1206 ≥ 2.2 µF; 1210 ≥ 10 µF
≤ 15%
≤ 3.5%
≤ 5%
1206 ≥ 10 µF; 1210 ≥ 22 µF
25 V
Exception: 0402 ≥ 10 nF; 0603 ≥ 47 nF; 0805 ≥ 220 nF;
1206 ≥ 1 µF;
1210 ≥ 4.7 µF
≤ 10%
≤ 2.5%
≤ 3.5%
0201 ≥ 560 pF; 0402 ≥ 56 nF; 0603 ≥ 1 µF;
≤ 5%
0805 ≥ 680 nF; 1206 ≥ 2.2 µF; 1210 ≥ 10 µF
1206 ≥ 4.7 µF
≥ 50 V
Exception: 0201 ≥ 47 pF;
0603 ≥ 47 nF
Insulation resistance after 1 minute at U_r (DC)
Maximum capacitance change as a function of temperature
(temperature characteristic/coefficient):
Operating temperature range:
≤ 10%
≤ 2.5%
1206 ≥ 1 µF
≤ 3.5%
≤ 3.0%
R_ins ≥ 10 GΩ or R_ins × C_r ≥ 500 seconds whichever is less
±15%
–55 °C to +125 °C
NOTE
Capacitance tolerance ±5% is not available for full product range, please contact local sales force before ordering
Oct 13, 2011 V.8
www.yageo.com