SIP90-0.1W Datasheet, PDF (1/4 Pages) XP Power Limited – REGULATED, LOW RIPPLE HIGH VOLTAGE DC TO DC CONVERTERS

ProRveelniability
SIP SERIES
REGULATED, LOW RIPPLE HIGH VOLTAGE DC TO DC CONVERTERS
90V @ 0.1W and 100V @ 1W
PRODUCT SELECTION TABLE
MODEL
SIP 90 – 0.1W
SIP 100 – 1W
OUTPUT
VOLTAGE
<25 – 90V
<25 – 100V
MAXIMUM
OUTPUT
CURRENT
0 to 1 mA
0 to 10 mA
PPRROODDUUCCTTDDEESSCCRRIPIPTITOIONN
Ideal for APD biasing and MEMS driver applications, the SIP Series
provides high performance in an ultra-thin, miniature single in-line
package. Designed for low cost, high quantity applications, these
DC to DC converters deliver high stability with very low ripple. The
output voltage is programmable via a 0 to 5 volt analog voltage.
The output voltage is inversely related to the programming voltage,
i.e. applying 5 volts to the programming sets the output voltage to
the minimum level. Conversely, 0 volts on the programming sets the
output voltage to the maximum level. The supply is linearly program-
mable through this range*2. An enable/disable function is included.
Applying a TTL Low (open collector compatible) disables the output
voltage to less than 10 volts.
BLOCK DIAGRAM
FEATURES
• Low Ripple
• Well Regulated
• Analog Programming Voltage
• Ultra-Thin, 0.16 inches (4mm)
• High Performance Low Cost
• MTBF: >2.03 million hours per Bellcore TR-332
• Packaging: Epoxy Coated
• RoHS Compliant
APPLICATIONS
• Photomultiplier Tubes
• Mass Spectrometers
• Avalanche Photodiode
• Microchannel Plates
• Piezo Materials
• Igniters
• Capacitor Charging
WWW.XPPOWER.COM
4760W02
PAGE 1