|
SDS150PS09B Datasheet, PDF (1/2 Pages) XP Power Limited – AC-DC Power Supplies | |||
|
150 Watts
SDS150 Series
xppower.com
⢠3â x 5â Footprint
⢠Fits 1U Applications
⢠Convection-cooled
⢠Open Frame & U-Channel Versions
⢠Optional Power Fail Detect Signal
⢠Optional Low Temperature Operation
⢠Up to 90% Efficiency
Specification
Input
Input Voltage
Input Frequency
Input Current
Inrush Current
Power Factor
Earth Leakage Current
Input Protection
⢠90-264 VAC (120-370 VDC)
⢠47-63 Hz
⢠2.0 A at 115 VAC
1.0 A at 230 VAC
⢠20 A at 115 VAC
63 A at 230 VAC
⢠>0.95
⢠<0.40 mA at 115 VAC
<0.75 mA at 230 VAC
⢠3.15 A on board fuse
Output
Output Voltage
⢠See table
Output Voltage Trim ⢠±5%
Initial Set Accuracy ⢠±1%
Minimum Load
⢠No minimum load required
Start Up Delay
⢠2 s max
Start Up Rise Time
⢠2 ms typical
Hold Up Time
⢠>16 ms
Line Regulation
⢠1% max, ±0.5% typical
Load Regulation
⢠5% max, ±3.0% typical
Transient Response
⢠4% max deviation, recovery to within 1%
in 500 µs for a 50% load change
Ripple & Noise
⢠1% pk-pk max
Overvoltage Protection ⢠112-132%, recycle input to reset
Overload Protection ⢠110-150% with auto recovery
Short Circuit Protection ⢠Trip & restart (Hiccup mode),
auto recovery
Temperature
Coefficient
⢠0.04%/°C
General
Efficiency
Isolation
Switching Frequency
Power Density
Signals
MTBF
⢠88% typical, 90% max
⢠3000 VAC Input to Output
1500 VAC Input to Ground
500 VDC Output to Ground
⢠PWM 60 kHz typical, PFC 100 kHz typical
⢠6.9 W/In3 for open frame version
⢠Power Fail Detect = TTL low (option)
⢠>100 kHrs per MIL-HDBK-217F
Environmental
Operating Temperature ⢠0 °C to +70 °C, derate linearly from 100%
load at +50 °C to 50% load at +70 °C,
low temperature option â-Lâ -40 °C
Cooling
⢠Convection-cooled
Operating Humidity ⢠5-95% RH, non-condensing
Storage Temperature ⢠-40 °C to +85 °C
Vibration
⢠2 g on 3 axes
EMC & Safety
Emissions
Harmonic Currents
Voltage Flicker
ESD Immunity
Radiated Immunity
EFT/Burst
Surge
Conducted Immunity
Dips & Interruptions
Safety Approvals
⢠EN55022, FCC Part 15, level B conducted
⢠EN61000-3-2
⢠EN61000-3-3
⢠EN61000-4-2, level 2 Perf Criteria A
⢠EN61000-4-3, 3 V/m Perf Criteria A
⢠EN61000-4-4, level 2 Perf Criteria A
⢠EN61000-4-5, level 3 Perf Criteria A
⢠EN61000-4-6, level 2 Perf Criteria A
⢠EN61000-4-11, 70% UT for 10 ms,
40% UT for 100 ms, <5% UT for 5000 ms
Perf Criteria A, B, B
⢠EN60950-1, UL60950-1, CSA60950-1
per cUL, CE Mark LVD
|
▷ |