|
QSB Datasheet, PDF (1/4 Pages) XP Power Limited – Industry Standard Packages | |||
|
75 350 Watts
QSB Series
xppower.com
⢠Wide Input Range
⢠Industry Standard Packages
⢠40 °C to +100 °C Operating Temperature
⢠High Power Density
⢠Base Plate Cooled
⢠Remote On/Off & Remote Sense
⢠3 Year Warranty
Specification
Input
Input Voltage Range
Input Current
Input Reverse Voltage
Protection
Input Filter
Undervoltage Lockout
Input Surge
⢠See tables
⢠See tables
⢠None
⢠Pi network
⢠QSB75-150: 24 Vin: - turn on 8.8 V,
turn off 8.0 V for 9-36 V,
QSB200: 24 Vin -turn on 9.6 V,
turn off 8.8 V,
QSB75-200: 48 Vin - turn on 17.0 V,
turn off 16.0 V,
QSB350: 24 Vin - turn on 17.0 V,
turn off 16.0 V,
QSB350: 48 Vin - turn on 35.0 V,
turn off 33.0 V
⢠24 Vin: 50 VDC for 100 ms
48 Vin: 100 VDC for 100 ms
Output
Output Voltage Trim ⢠±10%, see application notes
Initial Set Accuracy ⢠±1.5% max
Line Regulation
⢠±0.2% max measured from high line
to low line
Load Regulation
⢠±0.2% max measured from 0-100% load
Transient Response
⢠5% max deviation, recovery to within
1% in 500 µs, 25% step load change
Ripple & Noise
⢠3.3 & 5 V models: 100 mV pk-pk
12 & 15 V models: 150 mV pk-pk
24 V & 28 V models: 280 mV max pk-pk
20 MHz bandwidth (see note 1)
Overvoltage Protection ⢠115-140%
Short Circuit Protection ⢠Continuous
Thermal Shutdown
⢠Case temperature >105 °C
Temperature
Coefficient
⢠±0.03%/°C
Current Limit
⢠110-140% nominal output for 75 & 150 W
110-160% nominal output for 100 W
110-150% nominal output for 200 W
105-140% nominal output for 350 W
Remote On/Off
⢠See notes 2 & 3
Remote Sense
⢠Compensates up to 10% of Vout nominal,
total of output trim and remote sense
General
Efficiency
Isolation Voltage
Isolation Resistance
Isolation Capacitance
Switching Frequency
Power Density
MTBF
⢠See tables
⢠1500 VDC Input to Output
1500 VDC Input to Case
1500 VDC Output to Case
⢠107 â¦
⢠QSB75-200: 100 pF typical,
QSB350: 1000 pF typical
⢠QSB75: 300 kHz typical
QSB100, 150 & 200: 250 kHz typical
QSB350 (3V3 & 5 V): 300 kHz typical
QSB350 (12, 24 & 28 V): 330 kHz typical
⢠QSB75: 45.4 W/in3, QSB100: 60.5 W/in3,
QSB150: 57.2 W/in3, QSB200: 70.3 W/in3,
QSB350: 123.0 W/in3
⢠QSB75 & 100: 730 kHrs
QSB150 & 200: 1 MHrs
QSB350: 658 kHrs
typical to MIL-HDBK-217F at 25 °C, GB
Environmental
Operating Base Plate
Temperature
Storage Temperature
Operating Humidity
Cooling
⢠-40 °C to +100 °C, see derating curves
⢠-55 °C to +105 °C
⢠Up to 90% non-condensing
⢠Base plate cooled, see derating curves
EMC & Safety
Emissions
ESD Immunity
Radiated Immunity
EFT/Burst
Surge
Conducted Immunity
Safety Approvals
⢠EN55022, level A conducted with external
components, see test reports for further
details
⢠EN61000-4-2, level 2, Perf Criteria B
⢠EN61000-4-3, 3 V/m, Perf Criteria A
⢠EN61000-4-4, level 1, Perf Criteria A*
⢠EN61000-4-5, level 1, Perf Criteria A*
⢠EN61000-4-6, 3 V rms
Perf Criteria A
⢠QSB150 & QSB200: UL60950-1
* Recommended protection SMCJ40A for 24 Vin,
SMCJ78A for 48 Vin
|
▷ |