MTF50 Datasheet, PDF (1/2 Pages) XP Power Limited – DC-DC Power Supplies

Filter Module
MTF50
xpplc.com
• Wide Input Voltage Range 10-50 VDC
• Active Surge Protection
• Max Output Power 50 W
• Wide Temperature Range -55 °C to 100 °C
• EMI to MIL-STD-461E
• Input Immunity to MIL-STD-1275A/B/C
• Environment to MIL-STD-810F
Specification
Input
Input Voltage Range
Input Transient
Output
Output Voltage
Output Power
Inhibit
General
Efficiency
Resistance
Power Dissipation
Inhibited
Inrush Current
Fusing
MTBF
• 15.5-40 VDC
• 10-50 V for 10 s
600 V for 10 µs 50 Ω source resistance per
MIL-STD-704A, 100 V for 50ms 0.5 Ω
source resistance per MIL-STD-1275A,
±250 V for 100 µs as per MIL-STD-1275A
• Clamped <50 VDC
• 50 W maximum
• Off = TTL Low or short circuit
On = TTL High or open circuit
• 97% typical
• 0.25 Ω input to output
<0.1 Ω case to case pin at 10A
• 0.1 W
• 25 A at 28 Vin
• External fusing required
• 846 kHrs to MIL-HDBK-217F GF at +40 °C
Environmental
Operating Temperature • -40 °C to +85 °C ambient
-40 °C to +100 °C case
Extended Temperature Range:
-55 °C to +85 °C ambient
-55 °C to +100 °C case
Storage Temperature • -55 °C to +125 °C
Operating Altitude
• Tested to 70000 ft (21336 m)
Operating Humidity
• 88% relative humidity
240h MIL-STD-810D Method 507.2
Shock
• 100 g MIL-STD-810D Method 516.3
Vibration
• 10 to 2000Hz MIL-STD-810D
Method 514.3
Bump
• 2000 Bumps in each axis
40 g MIL-STD-810D Method 516.3
Salt Atmosphere
• 48 hours MIL-STD-810E Method 509.1
EMC
Conducted Emissions
Immunity
Conducted
Susceptiblity
• EN55022 Conducted Level B.
MIL-STD-461E:CE101 and CE102
• MIL-STD-704E. MIL-STD 704A and
MIL-STD-1275A/B/C/D
• MIL-STD-461E (CS101, CS114,
CS115 & CS116)
EMC standards are met when used in conjuction with the MTC series.