|
LDU2030S500 Datasheet, PDF (1/2 Pages) XP Power Limited – LED Driver LDU20 Series | |||
|
LED Driver
LDU20 Series
xppower.com
⢠Constant Current Output
⢠LED Drive Current up to 700 mA
⢠LED Strings from 2 V to 28 V
⢠PWM & Analog Dimming Control
⢠High Efficiency up to 95%
⢠Open or Short Circuit LED Protection
⢠3 Year Warranty
Specification
Input
Input Voltage
Input Filter
Input Surge
⢠7-30 VDC
⢠Capacitor
⢠40 VDC for 0.5 s
Output
Output Voltage
⢠See tables
(Vin must be at least 2 V greater than Vout)
Output Current
⢠See tables
Output Current Trim ⢠25-100%
Output Current
Accuracy
⢠±10
Ripple & Noise
⢠450 mV pk-pk max,
measured with 20 MHz bandwidth
Short Circuit Protection ⢠Current is limited to the rated output
Temperature
Coefficient
⢠±0.05%/°C max
Remote On/Off
⢠On = 0.3-1.25 V or open circuit
Off = â¤0.15 V (applied to control pin)
Quiescent input current is 25 µA max,
Remote On/Off Signal ⢠1 mA max
Current
Dimming
PWM
Output Current Range
Operating Frequency
On Time
Off Time
Amplitude
⢠25% to 100%
⢠1 kHz max
⢠200 ns min
⢠200 ns min
⢠1.25 V max
DC Voltage Control
Output Current Range ⢠25% to 100%
Control Input
⢠0.3 to 1.25 V max
Variable Resistor
Output Current Range ⢠25% to 100%
General
Efficiency
Switching Frequency
MTBF
⢠See tables
⢠70-450 kHz variable
⢠>1.6 MHrs to MIL-HDBK-217F at 25 °C,
GB
Environmental
Operating Temperature ⢠-40 °C to +70 °C
Storage Temperature ⢠-40 °C to +125 °C
Humidity
⢠Up to 95%, non-condensing
Thermal Impedance ⢠40 °C/W
EMC
Emissions
ESD Immunity
Radiated Immunity
EFT/Burst
Surge
Conducted Immunity
⢠EN55022 class B conducted & radiated
with external components - see
application notes
⢠EN61000-4-2, level 2 Perf Criteria A
⢠EN61000-4-3, level 2 Perf Criteria A
⢠EN61000-4-4, level 2 Perf Criteria A
⢠EN61000-4-5, level 2 Perf Criteria A
⢠EN61000-4-6, level 2 Perf Criteria A
|
▷ |