|
JTE Datasheet, PDF (1/2 Pages) XP Power Limited – DIP-24 Plastic Case | |||
|
6 Watts
JTE Series
xppower.com
⢠4:1 Input Range
⢠DIP 24 Plastic Case
⢠Operating Temperature 40 °C to +100 °C
⢠Single & Dual Outputs
⢠Optional Metal Case
⢠1500 VDC Isolation, 3000 VDC Option
⢠3 Year Warranty
Specification
Input
Input Voltage Range
⢠24 V (9-36 VDC)
48 V (18-75 VDC)
Input Current
⢠See table
Input Filter
⢠Pi network
Input Reflected Ripple ⢠20 mA pk-pk through 12 µH inductor
and 4.7 µF capacitor
Input Surge
⢠24 V models 50 VDC for 100 ms
48 V models 100 VDC for 100 ms
Under Voltage Lockout ⢠24 V models on >8.5 V, off <8.0 V
48 V models on >16.5 V, off <15.5 V
Output
Output Voltage
⢠See table
Output Voltage Balance ⢠±2% max, dual output models
Initial Set Accuracy ⢠±2% max
Minimum Load
⢠No minimum load required
Line Regulation
⢠±0.5% max
Load Regulation
⢠±1.2% max for single output and
±5% max for dual output from 10-100%
Cross Regulation
⢠±5% max on dual output models
(see note 4)
Start Up Delay
⢠20 ms typical
Ripple & Noise
⢠80 mV pk-pk (100 mV for D24 models),
20 MHz bandwidth (see note 5)
Transient Response
⢠<3% max deviation, recovery to within 1%
in 300 µs for a 25% load change (4%
max. deviation for S3V3 models)
Overload Protection ⢠135% - 185% of Full Load
Short Circuit Protection ⢠Trip & restart (Hiccup mode),
auto recovery
Maximum Capacitive ⢠See table
Load
Temperature
Coefficient
⢠±0.02/°C max
General
Efficiency
Isolation Voltage
Isolation Capacitance
Isolation Resistance
Switching Frequency
Power Density
MTBF
⢠See table
⢠1500 VDC Input to Output, for optional
high isolation version 3000 VDC input to
output add suffix â-Hâ to model number
1000 VDC Input to Case
1000 VDC Output to Case
⢠1000 pF typical input to output
⢠109â¦
⢠330 kHz typical
⢠15 W/in3
⢠>800 kHrs to MIL-HDBK-217F
at 25 °C, GB
Environmental
Operating Temperature ⢠-40 °C to +100 °C, derate from 100% load
at +60 °C to no load at +100 °C
Case Temperature
⢠+100 °C max
Storage Temperature ⢠-55 °C to +125 °C
Cooling
⢠Natural convection
Operating Humidity ⢠Up to 95%, non-condensing
EMC
Emissions
ESD Immunity
Radiated immunity
EFT/Burst
Surge
Conducted Immunity
Magnetic Fields
⢠EN55022 class A conducted
⢠EN61000-4-2, Level 3
8 kV air discharge Perf Criteria B,
6 kV contact discharge Perf Criteria B
⢠EN61000-4-3, 10 V/m, Perf Criteria A
⢠EN61000-4-4, level 3, Perf Criteria A*
⢠EN61000-4-5, level 2, Perf Criteria A*
⢠EN61000-4-6, 10 Vrms, Perf Criteria A
⢠EN61000-4-8, 1 A/m, Perf Criteria A
* External input capacitor required, 220µF/100V
|
▷ |