JTB0524S3V3 Datasheet, PDF (1/2 Pages) XP Power Limited – DC-DC Power Supplies

5 Watts
JTB05 Series
xppower.com
• 4:1 Input Range
• DIP-24 Metal Package
• Operating Temperature -25 °C to +100 °C
• Input Pi Filter
• Fully Regulated Single & Dual Outputs
• 1500 VDC Isolation
• Continuous Short Circuit Protection
Specification
Input
Input Voltage Range • 24 V (9-36 VDC)
48 V (18-72 VDC)
Input Current (no load) • See table
Input Filter
• Pi network
Output
Output Voltage
• See tables
Output Voltage Balance • ±1% max, dual output models
Initial Set Accuracy • ±2% max
Start Up Rise Time
• 3 ms max
Line Regulation
• ±0.5% max from high line to low line
Load Regulation
• ±0.5% max single output models,
±1.0% max dual output models
Cross Regulation
• ±2.2% on dual output models
Transient Response
• <1.0% max deviation, recovery to within
1% in 200 µs for a 50% load change
Ripple & Noise
• 100 mV or 1.0% pk-pk, whichever is
greater, 20 MHz BW
Overcurrent Protection • >130% constant power
Short Circuit Protection • Continuous with auto recovery
Temperature
Coefficient
• ±0.05/°C max
General
Efficiency
Isolation
Switching Frequency
MTBF
• See table
• 1500 VDC Input to Output
(1000 MΩ/80 pF)
• Variable 200-320 kHz
• 1,000 kHrs to MIL-HDBK-217F
Environmental
Operating Temperature • -25 °C to +100 °C (see derating curve)
Case Temperature
• +100 °C max
Storage Temperature • -40 °C to +100 °C
Shock
• 30 g, half sine wave 18 ms pulse applied
3 times on each of 6 axes
Vibration
• 5-500 Hz, 3 g, for 10 mins on each
of 3 axes
EMC
Emissions
ESD Immunity
Radiated Immunity
Conducted Immunity
• EN55022, level A conducted & radiated
with external components - see
application note
• EN61000-4-2, level 2 Perf Criteria A
• EN61000-4-3, 3 V/m Perf Criteria A
• EN61000-4-6, 3 V rms Perf Criteria A