|
JCJ08 Datasheet, PDF (1/2 Pages) XP Power Limited – 8/10 Watts JCJ Series | |||
|
8/10 Watts
JCJ Series
xppower.com
⢠2:1 Input Range
⢠DIP-24 Metal Package
⢠Operating Temperature -40 °C to +100 °C
⢠Single & Dual Outputs
⢠Continuous Short Circuit Protection
⢠1500 VDC Isolation
⢠3 Year Warranty
Specification
Input
Input Voltage Range
Input Current
Input Filter
Input Reflected
Ripple Current
Input Surge
Undervoltage Lockout
Reverse Voltage
Protection
⢠12 V (9-18 VDC)
24 V (18-36 VDC
48 V (36-75 VDC)
⢠See table
⢠Pi network
⢠JCJ08: 35 mA, JCJ10: 20 mA
pk-pk through 12 µH inductor
⢠12 V models 24/25 VDC for 100 ms
24 V models 40/50 VDC for 100 ms
48 V models 100 VDC for 100 ms
⢠None
⢠None
Output
Output Voltage
⢠See table
Output Voltage Balance ⢠±1% max, dual output models
Minimum Load
⢠No minimum load required
Initial Set Accuracy ⢠±1% max
Line Regulation
⢠±0.5% max
Load Regulation
⢠±0.7% for 2.5-3.3 V models, ±0.5% for all
other models (see note 2)
Cross Regulation
⢠±5% on dual output models (see note 3)
Transient Response
⢠<3% max deviation, recovery to within 1%
in 200 µs for a 25% load change
Ripple & Noise
⢠75 mV pk-pk, 20 MHz bandwidth,
(see note 4)
Overvoltage Protection ⢠JCJ10: 3.3 V models: 3.9 V typ.,
5 V models: 6.2 V typ.,
12 V models: 15.0 V typ.,
15 V models: 18.0 V typ.,
±12 V models: ±15.0 V typ.,
±15 V models: ±18.0 V typ.
JCJ08: No OVP
Overload Protection ⢠>150% of full load
Short Circuit Protection ⢠Trip & restart (hiccup) with auto recovery
Maximum Capacitive ⢠See tables
Load
Temperature
Coefficient
⢠±0.02/°C max
General
Efficiency
Isolation
Isolation Capacitance
Switching Frequency
Power Density
MTBF
⢠See tables
⢠1500 VDC Input to Output
1000 VDC Input to Case
1000 VDC Output to Case
⢠1200 pF max
⢠330 kHz typical
⢠JCJ10: 25 W/in3
JCJ08: 20 W/in3
⢠>900 KHrs to MIL-HDBK-217F
at 25 °C, GB
Environmental
Operating Temperature ⢠-40 °C to +100 °C, derate from 100% load
at +60 °C to no load at +100 °C
Case Temperature
⢠+100 °C max
Storage Temperature ⢠-40 °C to +125 °C
Humidity
⢠Up to 95% RH, non-condensing
Cooling
⢠Natural convection
EMC
Emissions
ESD Immunity
EFT/Burst
Surge
Conducted Immunity
Magnetic Field
⢠EN55022 Class A conducted
& radiated with external components,
see application note
⢠EN61000-4-2, 8 kV air discharge,
4 kV contact discharge
JCJ10: 6 kV contact discharge,
Perf Criteria A
⢠EN61000-4-4, level 1
JCJ10: level 3, Perf Criteria A, (see note 5)
⢠JCJ08: EN61000-4-5, installation class 2,
JCJ10: installation class 3,
Perf Criteria A, (see note 5)
⢠EN61000-4-6, 3 Vrms
JCJ10: 10 Vrms, Perf Criteria A
⢠EN61000-4-8, 1 A/m Perf Criteria A
|
▷ |