|
JCE06 Datasheet, PDF (1/2 Pages) XP Power Limited – 6 Watts JCE Series | |||
|
6 Watts
JCE Series
xppower.com
⢠2:1 Input Range
⢠DIP 24 Plastic Case
⢠Operating Temperature 40 °C to +100 °C
⢠Single & Dual Outputs
⢠Optional Metal Case
⢠1500 VDC Isolation, 3000 VDC Option
⢠3 Year Warranty
Specification
Input
Input Voltage Range
⢠12 V (9-18 VDC)
24 V (18-36 VDC)
48 V (36-75 VDC)
Input Current
⢠See table
Input Filter
⢠Pi network
Input Reflected Ripple ⢠20 mA pk-pk through 12 µH inductor
and 4.7 µF capacitor
Input Surge
⢠12 V models 25 VDC for 100 ms
24 V models 50 VDC for 100 ms
48 V models 100 VDC for 100 ms
Under Voltage Lockout ⢠12 V models on >8.5 V, off <8.0 V
24 V models on >16.5 V, off <15.5 V
48 V models on >34.5 V, off <33.5 V
Output
Output Voltage
⢠See table
Output Voltage Balance ⢠±2% max, dual output models
Initial Set Accuracy ⢠±2% max
Minimum Load
⢠No minimum load required
Line Regulation
⢠±0.5% max
Load Regulation
⢠±1.2% max, for single output and ±5%
max for dual output from 10-100%
Cross Regulation
⢠±5% max, on dual output models
(see note 1)
Start Up Delay
⢠20 ms typical
Ripple & Noise
⢠80 mV pk-pk (100 mV for D24 models),
20 MHz bandwidth. See note 2
Transient Response
⢠3% max deviation, recovery to within 1%
in 300 µs for a 25% load change (4%
max. deviation for S3V3 models)
Overload Protection ⢠135% - 185% of full load
Short Circuit Protection ⢠Trip and restart (hiccup mode),
auto recovery
Maximum Capacitive ⢠See table
Load
Temperature
Coefficient
⢠0.02%/°C max
General
Efficiency
Isolation Voltage
Isolation Capacitance
Isolation Resistance
Switching Frequency
Power Density
MTBF
⢠See table
⢠1500 VDC Input to Output
For optional high isolation versions
3000 VDC Input to Output add suffix -H to
model number
1000 VDC Input to Case
1000 VDC Output to Case
⢠1000 pF typical input to output
⢠109â¦
⢠330 kHz typical
⢠15 W/in3
⢠>800 KHrs to MIL-STD-217F at 25 °C, GB
Environmental
Operating Temperature ⢠-40 °C to +100 °C (see derating curve)
Case Temperature
⢠+100 °C max
Storage Temperature ⢠-55 °C to +125 °C
Cooling
⢠Convection-cooled
Operating Humidity ⢠Up to 95% RH, non-condensing
EMC
Emissions
ESD Immunity
Radiated Immunity
EFT/Burst
Surge
Conducted Immunity
Magnetic Field
⢠EN55022 Class A conducted
⢠EN61000-4-2, level 3, Perf Criteria B
⢠EN61000-4-3, 10 V/m, Perf Criteria A
⢠EN61000-4-4, level 3 Perf Criteria A
⢠EN61000-4-5, level 2, Perf Criteria A*
⢠EN61000-4-6, 10 Vrms, Perf Criteria A
⢠EN61000-4-8, 1 A/m, Perf Criteria A
* External input capacitor required, 220µF/100V (See note 7)
|
▷ |