|
JCB0305S05 Datasheet, PDF (1/2 Pages) XP Power Limited – DC-DC Power Supplies | |||
|
3 Watts
JCB Series
xppower.com
⢠2:1 Input Range
⢠Operating Temperature -40 ºC to +100 ºC
⢠Single & Dual Outputs
⢠1500 VDC Isolation
⢠Optional Isolation to 3000 VDC
⢠Optional Metal Case
⢠3 Year Warranty
Specification
Input
Input Voltage Range
Input Current
Input Filter
Input Reflected Ripple
Input Surge
⢠5 V (4.5-9 VDC)
12 V (9-18 VDC)
24 V (18-36 VDC)
48 V (36-75 VDC)
⢠See table
⢠LC network
⢠35 mA pk-pk through 12 µH inductor,
5 Hz to 20 MHz
⢠5 V models 15 VDC for 100 ms
12 V models 24 VDC for 100 ms
24 V models 40 VDC for 100 ms
48 V models 80 VDC for 100 ms
Output
Output Voltage
⢠See table
Minimum Load
⢠Minimum load required, see note 1
Intial Set Accuracy
⢠±1% max
Start Up Delay
⢠20 ms typical
Start Up Rise Time
⢠10 ms typical
Line Regulation
⢠±0.5% max
Load Regulation
⢠±0.5% max
Cross Regulation
⢠±5% on dual output models, see note 2
Transient Response
⢠<3% deviation, recovery to within 1% in
2 ms for a 50% load change
Ripple & Noise
⢠60 mV pk-pk, 20 MHz BW
Short Circuit Protection ⢠Continuous with auto recovery
Maximum Capacitive ⢠See tables
Load
Temperature
Coefficient
⢠±0.02/°C max
General
Efficiency
Isolation
Isolation Capacitance
Switching Frequency
MTBF
⢠See tables
⢠1500 VDC Input to Output
For optional high isolation version 3000 VDC,
see note 3
1500 VDC Input to Case
1500 VDC Output to Case
⢠60 pF max
⢠100-400 kHz variable
⢠>2 MHrs to MIL-STD-217F
Environmental
Operating Temperature ⢠-40 ºC to +100 ºC, derate from 100% load
at +80 °C to no load at +100 °C
Case Temperature
⢠+100 ºC max
Storage Temperature ⢠-40 ºC to +125 ºC
Humidity
⢠Up to 90%, non-condensing
Cooling
⢠Natural convection
|
▷ |