|
JCA1005D01 Datasheet, PDF (1/2 Pages) XP Power Limited – 10 Watts JCA Series | |||
|
10 Watts
JCA Series
xppower.com
⢠Compact 1.0â x 0.8â Metal Package
⢠Industry Standard Pin Out
⢠2:1 Input Range
⢠Single & Dual Outputs
⢠Operating Temperature 40 °C to +100 °C
⢠UL & TUV Approval Pending
⢠3 Year Warranty
Specification
Input
Input Voltage Range
Input Current
Input Filter
Undervoltage Lockout
Input Reflected
Ripple Current
Input Surge
⢠5 V (4.5-9.0 VDC)
12 V (9-18 VDC)
24 V (18-36 VDC)
48 V (36-75 VDC)
⢠See table
⢠Pi network
⢠Turn On by 95% of rated input
Turn Off by 85% of rated input
⢠80 mA, 5 V input models, 30 mA all others
12 µH inductor, 5 Hz to 20 MHz
⢠5 V models 10 V for 1 s max,
12 V models 25 V for 1 s max,
24 V models 50 V for 1 s max,
48 V models 100 V for 1 s max
Output
Output Voltage
⢠See table
Initial Set Accuracy ⢠±1% max
Start Up Delay
⢠30 ms max
Start Up Rise Time
⢠3.5 ms typical
Minimum Load
⢠No minimum load required
Line Regulation
⢠±0.3%
Load Regulation
⢠±1%
Cross Regulation
⢠±5% on dual output models with one
output at 5% load and other varied from
5% to 100%
Transient Response
⢠4% max deviation, recovery to within
1% in <500 µs for a 25% load change
at 1 A/µs
Ripple & Noise
⢠50 mV pk-pk, 20 MHz bandwidth
Overcurrent Protection ⢠150% typical, trip and restart
(hiccup mode)
Short Circuit Protection ⢠Continuous with auto recovery
Overvoltage Protection ⢠150% typical, Recycle input to reset
Temperature
Coefficient
⢠±0.05%/°C
General
Efficiency
Isolation
Switching Frequency
Power Density
MTBF
⢠See table
⢠1500 VDC Input to Output, basic insulation
500 VDC Input to Case
500 VDC Output to Case
⢠300 kHz typical
⢠31.25 W/in3
⢠>950 kHrs to MIL-HDBK-217F at 25 °C,
GB
Environmental
Operating Temperature ⢠-40 °C to +100 °C output power derates
from 100% load at +70 °C linearly to
0% load at +100 °C
Case Temperature
⢠+100 °C max
Storage Temperature ⢠-55 °C to +125 °C
Cooling
⢠Convection cooled
Operating Humidity ⢠Up to 95% RH, non-condensing
EMC & Safety
Emissions
ESD Immunity
Radiated Immunity
Conducted Immunity
Magnetic Fields
Safety Approvals
⢠EN55022, level A conducted
(level B with external components, see
application note), level B radiated
⢠EN61000-4-2, level 2 Perf Criteria A
⢠EN61000-4-3, 3 V/m Perf Criteria A
⢠EN61000-4-6, 3 V rms Perf Criteria A
⢠EN61000-4-8, 10 A/m, Perf Criteria A
⢠EN60950-1, UL60950-1,
CSA C22.2 No. 60950-1-03, pending.
CE Mark LVD
|
▷ |