JAZ05-12S05 Datasheet, PDF (1/4 Pages) XP Power Limited – DC-DC Power Supplies

5-16 Amps
JAZ Series
xppower.com
• Industry Standard Pin-out
• 0.75 - 5.5 VDC Adjustable Output Versions
• No Minimum Load Required
• Continuous Short Circuit Protection
• Input Range from 3-5.5 VDC and 9-14 VDC
• UL60950 Approval
• SIP and SMT Versions Available
Specification
Input
Input Voltage Range
Input Current
Undervoltage Lockout
Protection
Input Filter
• 5 V: 3 - 5.5VDC
12 V: 9 - 14 VDC
• See tables
• 5 V: Turn ON > 2.8 V typical
Turn OFF > 2.7 V typical
12 V: Turn ON > 8.5 V typical
Turn OFF > 8.0 V typical
(see note 2)
• Capacitive
Output
Output Voltage
• See tables
Output Voltage Trim
• 0.75 - 5.5 V, output is set by R Trim -
see output configuration table
Minimum Load
• No minimum load requirements
Line Regulation
• ±0.2%
Load Regulation
• ±0.5%
Setpoint Accuracy
• ±1.5%
Transient Response
• Recovery to within 1% of nominal output
voltage in 200 µS after a 25% load change
Ripple & Noise
• JAZ05/10/15: 20 mVrms, 50 mV pk-pk
JAZ05 5 V: 45 mVrms, 75 mV pk-pk
JAZ16: 30 mVrms, 75 mV pk-pk
Temperature
Coefficient
• 0.03% /˚C
Short Circuit Protection • Continuous
Overtemperature
Protection
• JAZ5/10/15: 120 ˚C typical
JAZ16: 130 ˚C typical
(measured internally on all units)
Remote On/Off
• On = Open circuit or ≥ Vin
Off = < 0.4 V
For negative logic ‘L’ option:
On = Open circuit or < 0,4 V
Off = 2.8 V < V < Vin
General
Efficiency
Isolation Voltage
Switching Frequency
Packaging Style
MTBF
• See tables
• Non-isolated
• 300 kHz typical
• SIP or SMT
• JAZ05: 1500 kHrs
JAZ10: 1450 kHrs
JAZ15: 1370 kHrs
JAZ16: 1300 kHrs
Environmental
Operating Temperature • -40 ˚C to +85 ˚C, see derating curves
Cooling
• Convection or force-cooled
Storage Temperature • -55 ˚C to +125 ˚C
EMC & Safety
Safety Approvals
• UL60950
1