FS02 Datasheet, PDF (1/9 Pages) List of Unclassifed Manufacturers – SURFACE MOUNT SCR

ProRveelniability
FS SERIES
ISOLATED, PROPORTIONAL DC TO HV DC CONVERTERS
200V to 6kV at 10W
PRODUCT DESCRIPTION
The new FS Series of isolated, proportional DC to high voltage DC
converters offers stout design and enhanced features for excellent
long term reliability. Outputs ranging from 200V through 6kV are of-
fered in miniature, cost-effective, PC-mount packages. Based on XP
EMCO’s proven high-reliability, high voltage power conversion topol-
ogy, the FS Series boasts a full ten watts of output power for each
model and features a low 0.7V turn-on voltage. The output voltage
is proportional to the input voltage, from turn on to maximum output
voltage, enabling easy control of the high voltage. XP EMCO’s pro-
prietary, quasi-sinewave, resonant oscillator produces clean, reliable
high voltage with inherently low ripple, low EMI/RFI, low input ripple
current, and low conducted emissions. Additional features such as
arc protection^*8, short circuit protection, surge current limiting, and
over-temperature protection are available.
• Electrophoresis
• Piezo Devices
• Capacitor Charging
• Mass Spectrometry
• Electrostatic Chucks
APPLICATIONS
OPTIONS
• Available in Four Standard Input Voltage Ranges: 0–12, 15, 24, and 28V.
(For Other Input / Output Voltages, Consult Factory)
• Polarity: Choose Negative or Positive Outputs for Models FS50 and FS60
• Dual Output (Center Tap): Available for Models FS02CT through FS40CT
• B Version - Without Enhanced Features. See ‘B’ Drawing.
• Extended Operating Temperature: -55º to +85ºC (Case)(-T Option)*⁶
• Extended Environmental Screening and Burn-In Available, Consult Factory
PRODUCT SELECTION TABLE
MODEL
FS02
FS03
FS05
FS10
FS20
FS30
FS40
FS50
FS60
OUTPUT
VOLTAGE*²
(POSITIVE OR NEGATIVE)
0 to 200V
0 to 300V
0 to 500V
0 to 1kV
0 to 2kV
0 to 3kV
0 to 4kV
0 to 5kV
0 to 6kV
OUTPUT
CURRENT *¹
50mA
33.3mA
20mA
10mA
5mA
3.33mA
2.5mA
2mA
1.67mA
OUTPUT
POWER*⁴
0 to 10W
0 to 10W
0 to 10W
0 to 10W
0 to 10W
0 to 10W
0 to 10W
0 to 10W
0 to 10W
Complete List of Models on pages 2 and 3
FEATURES
• Output Proportional and Linear to Input
<0.7V Turn-On Voltage
• SMART FEATURES for Enhanced Reliability:
Over-Temperature Protection with Automatic Shutdown and Error Code
Over-Voltage Protection with Automatic Shutdown and Error Code Output
• Disable Pin, TTL Compatible High=Off
• No Minimum Load Current Required
• Low-Noise, Quasi-Sinewave Oscillator
• Inaudible >25kHz Oscillator, Low EMI/RFI
• Low Conducted Emissions and Low Input Ripple Current
• Stable Operating Frequency Over Entire Operating Range
• High Input to Output Galvanic Isolation
• Very Low Input/Output Leakage Current: <100nA
• Very Low Input/Output Coupling Capacitance: <100pF
• Reversible Output Polarity (4kV Modules and Below)
• High Efficiency, No Derating Required
• Robust Design: Conservative Internal High Voltage Clearance and Voltage
Gradient Control for Exceptional Long-Term Reliability
• Arc Protection^*8 and Short Circuit Protection*⁵
• Output Surge Current Limited
• High Reliability: MTBF > 840,000 Hours per Belcore TR 332
• Excellent Internal Thermal Management
• Anodized Aluminum Heatsink Surface
• Two Threaded, Blind Inserts Allow for Easy Heatsinking and/or
Chassis Mounting Options
• UL Certified Encapsulant, Meets 94V-0 Flammability
• RoHS Compliant
WWW.XPPOWER.COM
4725V01
PAGE 1