DCU105S05 Datasheet, PDF (1/4 Pages) XP Power Limited – DC-DC PCB Mount

DC-DC PCB Mount
1-25 Watts
DCU Series
THE XPERTS IN POWER
•
Fully Isolated Outputs
•
2:1 Input Range
•
Metal Case
•
Surface Mount Construction
•
DIN Rail Mount Option
•
Screw Terminals Option
•
Remote ON/OFF Available
Specification
Input
Input Voltage
• 4.5-9.0 VDC, 9-18 VDC,
18-36 VDC, 36-72 VDC
Output
Output Voltage
•
Output Voltage
•
Adjustment
Minimum Load
•
Start Up Delay
•
Initial Set
•
Accuracy
Drift
•
Line Regulation
•
Load Regulation
•
Ripple & Noise
•
Overvoltage
•
Protection
Short Circuit &
•
Overload Protection
Temperature
•
Coefficient
Remote ON/OFF
•
See Table
±5% DCU15 & 25 models only
(3 V models 3.20 to 3.47 V)
No minimum load required
20 ms max
+5% -3% max
+5%, DCU 5 V output
±60 mV max
0.5% max (0.1% typical)
1% max single output models
(0.2% typical)
5% max dual output models
(1.0% typical)
40 mV p-p typical, 150 mV max.
(the addition of a 100 µF (220 µF
for 3 & 5 V outputs) capacitor across
output of device reduces ripple to
below 40 mV pk-pk
DCU15 & 25 models only - operates
115-140% of output (3 V models
4.0-5.25 V)
Operates >105% of rating and
recovers automatically
±0.02%/°C
DCU15 & 25 models only - link RC
to -ve I/P for operation (or TTL low),
open circuit for shutdown
(or TTL high)
General
Efficiency
Lead Temperature
Isolation
• 67% to 85% dependant on model
• +260°C for less than 15 seconds
• 500 VAC Input to Output,
500 VAC Input to Ground,
500 VAC Output to Ground
Environmental
Operating
•
Temperature
Storage
•
Temperature
Shock
•
Vibration
•
-20 °C to +70 °C
See Derating Curve
-40 °C to +85 °C
50 G for 11 ms,
once on each X, Y & Z axis
10 G 10-55 Hz 3 mins period,
60 mins along X, Y & Z axis
EMC & Safety
Emissions
•
ESD Susceptability •
Radiated
•
Susceptability
EFT/Burst
•
Surge
•
Safety Approvals
•
EN55022 Level A Conducted
with external components
EN55022 Level A Radiated
EN61000-4-2 Level 4
EN61000-4-3 Level 3
EN61000-4-4 Level 3
EN61000-4-5 Level 3
EN60950, UL1950, cUL1950
•
www.xpplc.com
•
[e-mail]