CPM50FS05 Datasheet, PDF (1/4 Pages) XP Power Limited – Component Power DC-DC Modules

Component Power DC-DC Modules
50-700 Watts
CPM Series
THE XPERTS IN POWER
•
Low Profile
•
Industry Standard Footprint
•
Wide Operating Temperature
•
Parallel Operation
•
Remote ON/OFF
•
Adjustable Output
•
Overvoltage & Overload Protection
Specification
Input
Input Voltage
•
Output
Output Voltage
•
Output Voltage
•
Adjustment
Minimum Load
•
Start Up Delay
•
Initial Set Accuracy •
Drift
•
Line Regulation
•
Load Regulation
•
Ripple & Noise
•
Overload
•
Protection
Overvoltage
•
Protection
Remote Sense
•
Remote ON/OFF
•
18-36 VDC
36-76 VDC
45-160 VDC
88-370 VDC
200-400 VDC
(see tables)
See Tables
±10% CPM50 & 100,
60-110% CPM150 ,CPM200 &
CPM400, 80-110% CPM600
No minimum load required
200 ms max (100% load)
±4.0% max
±0.5% max
±0.5% max
±0.9% max
200 mV pk-pk (0°C to +85°C)
Operates at >105% of rated current,
recovers automatically
Operates at between 115-140% of
rating recycle input to reset
Compensates for 300mV min
if not required then sense connections
must be made locally ie +S to +Vout
and -S to -Vout
Standard on all models
General
Efficiency
•
Isolation
•
Switching Frequency •
Parallel Operation •
Up to 89% dependant on model
3 kVAC Input to Output
2 kVAC Input to Baseplate
500 VDC Output to Baseplate
500 kHz - CPM50 & 100
370 kHz - CPM150, CPM200, 400 & 600
Current share pin provided on all
except 50 W models, derate max
current by 10% per module
Environmental
Operating
•
Temperature
Storage
•
Temperature
Relative Humidity •
Shock
•
Vibration
•
-10 °C to +85°C CPM50 & CPM100,
-20 °C to +85°C CPM150, CPM200,
CPM400 & CPM600 (baseplate)
-40 °C to +85 °C
20-95% non-condensing
20 G for 11 ms once each along
X, Y & Z axis
10-55 Hz 5 G for 3 min periods,
over 60 mins along each X, Y & Z axis
Safety
Emissions
ESD Susceptibility
Radiated
Susceptibility
EFT/Burst
Surge
Safety Approvals
• EN55022 Level A conducted
EN55022 Level A radiated
Contact sales for Application Note
• EN61000-4-2 Level 2
• EN61000-4-3 Level 3
• EN61000-4-4 Level 3
• EN61000-4-5 Level 3
• UL1950, C-UL, EN60950, VDE0160
IEC950
•
www.xpplc.com
•
[e-mail]