|
CPH500USC3 Datasheet, PDF (1/2 Pages) XP Power Limited – Component Power AC Front End Modules | |||
|
Component Power AC Front End Modules
500 & 1000 Watts
CPH Series
THE XPERTS IN POWER
â¢
85-264 VAC Input
â¢
PFC to EN61000-3-2
â¢
Efficiency up to 95%
â¢
Fixed Switching Frequency
â¢
Parallel Operation
â¢
Compatible with CPM Series
â¢
International Approvals
Specification
Input
Input Voltage
â¢
Input Frequency
â¢
Input Current
â¢
(Typical)
Inrush Current
â¢
Inrush Current
â¢
Protection
Power Factor
â¢
Leakage Current
â¢
85-264 VAC (derate the CPH1000 to
850 W between 85 & 95 VAC)
47-63 Hz
5.6/4.0 A at 115/230 VAC CPH500
11.5/8.5 A at 115/230 VAC CPH1000
15/30 A typ at 115/230 AC CPH500
CPH1000 limited by external
resistance
contact technical sales for details
Standard
0.98 typical (complies with
EN61000-3-2 85-255 VAC)
<0.3 mA CPH500, <0.75 mA CPH1000
Output
Output Power
⢠500/1000 W for CPH500/1000
95-170 VAC
750/1500 W for CPH500/1000 with
input voltage 170-264 VAC
Output Voltage
⢠300-360 VDC (automatically changes
according to the input voltage)
Minimum Load
⢠No minimum load required
Overvoltage
Protection
⢠390-440 VDC CPH500,
400-450 VDC CPH1000
Thermal Protection ⢠+100 °C ±15 °C (baseplate)
Current Share
⢠Standard
General
Efficiency
Isolation
⢠90/95% typical at 100/200 VAC
⢠Input to Output not isolated,
3000 VAC Input to Ground
500 VDC Output to Ground
Switching Frequency â¢
Power Good Signal â¢
Inverter Operation â¢
Monitoring
Enable Signal
â¢
170 kHz CPH500, 130 kHz CPH1000
Open-collector output, max sink
current 5 mA, max voltage 35 V
CPH500
Open-collector output, max sink
current 5/10 mA for CPH500/CPH1000
Open-collector output, max sink
current 10 mA, max voltage 35 V
CPH1000 only
Environmental
Operating
â¢
Temperature
Storage Temperature â¢
Humidity
â¢
Vibration
â¢
Shock
â¢
-20 °C to +85 °C (aluminium baseplate)
-40 °C to +85 °C
20-95% RH non-condensing
10-55 Hz 5G 3 minute period,
60 mins along each X, Y & Z axis
20 G 11 ms once each X, Y & Z axis
Safety
Emissions
ESD Susceptibility
Radiated
Susceptibility
EFT/Burst
Surge
Safety Approvals
⢠EN55022 Level B conducted
EN55022 Level B radiated
External components required
Contact Sales for Application Note
⢠EN61000-4-2 Level 2
⢠EN61000-4-2 Level 3
⢠EN61000-4-4 Level 3
⢠EN61000-4-5 Level 3, 4
⢠EN60950, UL1950, CUL1950
â¢
www.xpplc.com
â¢
sales@xpplc.com
|
▷ |