XC95144XV Datasheet, PDF (3/9 Pages) Xilinx, Inc – 144 macrocells with 3,200 usable gates

R
XC95144XV High-Performance CPLD
Absolute Maximum Ratings
Symbol
Description
Value
Units
V_CC
Supply voltage relative to GND
–0.5 to 2.7
V
V_CCIO
Supply voltage for output drivers
–0.5 to 3.6
V
V_IN
Input voltage relative to GND⁽¹⁾
–0.5 to 3.6
V
V_TS
Voltage applied to 3-state output⁽¹⁾
–0.5 to 3.6
V
T_STG
Storage temperature (ambient)
–65 to +150
o_C
T_SOL
Maximum soldering temperature (10s @ 1/16 in. = 1.5 mm)
+260
o_C
T_J
Junction temperature
+150
o_C
Notes:
1. Maximum DC undershoot below GND must be limited to either 0.5V or 10 mA, whichever is easier to achieve. During transitions, the
device pins may undershoot to –2.0V or overshoot to +3.6V, provided this over- or undershoot lasts less than 10 ns and with the
forcing current being limited to 200 mA.
2. Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress
ratings only, and functional operation of the device at these or any other conditions beyond those listed under Operating Conditions
is not implied. Exposure to Absolute Maximum Ratings conditions for extended periods of time may affect device reliability.
Recommended Operation Conditions
Symbol
V_CCINT
V_CCIO
V_IL
V_IH
V_O
Parameter
Supply voltage for internal logic
and input buffers
Commercial T_A = 0^oC to +70^oC
Industrial T_A = –40^oC to +85^oC
Supply voltage for output drivers for 3.3V operation
Supply voltage for output drivers for 2.5V operation
Supply voltage for output drivers for 1.8V operation
Low-level input voltage
High-level input voltage
Output voltage
Quality and Reliability Characteristics
Symbol
T_DR
N_PE
V_ESD
Parameter
Data retention
Program/Erase cycles (endurance)
Electrostatic Discharge (ESD)
Min
20
10,000
2,000
Min
Max
Units
2.37
2.62
V
2.37
2.62
3.13
3.46
V
2.37
2.62
V
1.71
1.89
V
0
0.8
V
1.7
3.6
V
0
V_CCIO
V
Max
Units
-
Years
-
Cycles
-
Volts
DS051 (v2.2) August 27, 2001
www.xilinx.com
3
Advance Product Specification
1-800-255-7778