XCN09029 Datasheet, PDF (1/3 Pages) Xilinx, Inc – Customer Notification – For Your Information

XCN09029 (v1.0) October 26, 2009
Platform Flash PROM Data Sheet
(DS123) and User Guide (UG161)
Revisions
Customer Notification – For Your Information
Overview
The purpose of this notification is to communicate some revisions to the Platform Flash PROM DS123, v2.17,
data sheet and UG161, v1.5, user guide. The Platform Flash PROM family includes the XCF01S, XCF02S,
XCF04S, XCF08P, XCF16P, and XCF32P devices. There is no change to the form, fit, or function of these
devices.
Note that this notification applies to Commercial (C) grade XCFxxS and XCFxxP PROM products only. This
notification does not apply to the Platform Flash XL (XCF128X) device or Military XQF32PVO48M grade
device.
Description
The Platform Flash PROM DS123 data sheet and UG161 user guide have been revised according to Xilinx
product documentation standards such that the DS123 data sheet is the primary location for product
specifications and the UG161 user guide is the primary location for product usage information. These
revisions also include clarifications for additional product support and usage. The details of the key revisions
are listed below to insure identification of information that has changed locations, has been clarified, or has
been listed as important. All the revisions are also listed within the Revision History sections of DS123 data
sheet and UG161 user guide. There is no change to the form, fit, or function of these devices.
Key revisions in DS123, Platform Flash In-System Programmable Configuration PROMs data sheet, v2.17:
 Removed empty placeholders for XCFxxP VCCO AC/DC Characteristics at 1.5V operation. Although
the product plans included extension of the VCCO operation down to 1.5V, the characteristics of
XCFxxP VCCO operation at 1.5V were never specified and the empty specification placeholders have
been removed along with all references to XCFxxP VCCO operation at 1.5V.
 Moved product user guidance table of “Xilinx FPGAs and Compatible Platform Flash PROMs” from
the DS123 data sheet to the UG161 user guide.
 Removed “PROM to FPGA Configuration Mode and Connections Summary” section that was a
redundant and less complete form of the information contained in the UG161 user guide and the
FPGA configuration user guides.
 Removed “Configuration PROM-to-FPGA Device Interface Connection Diagrams” that were a
redundant and a less complete set of reference schematics contained in the UG161 user guide.
Key revisions in UG161, Platform Flash PROM User Guide, v1.5:
 Removed references to the never-specified XCFxxP VCCO operation at 1.5V. See the “Removed
empty placeholders for XCFxxP VCCO AC/DC Characteristics at 1.5V operation” item in the DS123
data sheet revision list, above.
 Added product user guidance table of “Xilinx FPGAs and Compatible Platform Flash PROMs” that
was moved from the DS123 data sheet to the UG161 user guide.
 Added Spartan-6 and Virtex-6 FPGAs to the table of “Xilinx FPGAs and Compatible Platform Flash
PROMs”.
 Replaced example third-party voltage regulator part number with reference to Xilinx Power Solutions
website (http://www.xilinx.com/power) for access to a wider range of applicable voltage regulator
solutions.
 Updated software flows to ISE® software 11.x.
© Copyright 2009 Xilinx, Inc. All Rights Reserved. XILINX, the Xilinx logo, the Brand Window and other designated brands
included herein are trademarks of Xilinx, Inc. All other trademarks are the property of their respective owners.
XCN09029 (v1.0) October 26, 2009
www.xilinx.com
1