English
Language : 

XC5VLX85-3FFG676C Datasheet, PDF (1/91 Pages) Xilinx, Inc – Virtex-5 FPGA Data Sheet
DS202 (v5.3) May 5, 2010
0
Virtex-5 FPGA Data Sheet:
DC and Switching Characteristics
0
0
Product Specification
Virtex-5 FPGA Electrical Characteristics
Virtex®-5 FPGAs are available in -3, -2, -1 speed grades,
with -3 having the highest performance. Virtex-5 FPGA DC
and AC characteristics are specified for both commercial
and industrial grades. Except the operating temperature
range or unless otherwise noted, all the DC and AC
electrical parameters are the same for a particular speed
grade (that is, the timing characteristics of a -1 speed grade
industrial device are the same as for a -1 speed grade
commercial device). However, only selected speed grades
and/or devices might be available in the industrial range.
All supply voltage and junction temperature specifications
are representative of worst-case conditions. The
parameters included are common to popular designs and
typical applications.
This Virtex-5 FPGA data sheet, part of an overall set of
documentation on the Virtex-5 family of FPGAs, is available
on the Xilinx website:
• Virtex-5 Family Overview
• Virtex-5 FPGA User Guide
• Virtex-5 FPGA Configuration Guide
• Virtex-5 FPGA XtremeDSP™ Design Considerations
• Virtex-5 FPGA Packaging and Pinout Specification
• Embedded Processor Block in Virtex-5 FPGAs Reference
Guide
• Virtex-5 FPGA RocketIO™ GTP Transceiver User Guide
• Virtex-5 FPGA RocketIO GTX Transceiver User Guide
• Virtex-5 FPGA Embedded Tri-Mode Ethernet MAC User
Guide
• Virtex-5 FPGA Integrated Endpoint Block User Guide for
PCI Express® Designs
• Virtex-5 FPGA System Monitor User Guide
• Virtex-5 FPGA PCB Designer’s Guide
All specifications are subject to change without notice.
Virtex-5 FPGA DC Characteristics
Table 1: Absolute Maximum Ratings
Symbol
Description
Units
VCCINT
VCCAUX
VCCO
VBATT
VREF
VIN(3)
IIN
VTS
TSTG
TSOL
TJ
Internal supply voltage relative to GND
Auxiliary supply voltage relative to GND
Output drivers supply voltage relative to GND
Key memory battery backup supply
Input reference voltage
3.3V I/O input voltage relative to GND(4) (user and dedicated I/Os)
3.3V I/O input voltage relative to GND (restricted to maximum of 100 user I/Os)(5)
2.5V or below I/O input voltage relative to GND (user and dedicated I/Os)
Current applied to an I/O pin, powered or unpowered
Total current applied to all I/O pins, powered or unpowered
Voltage applied to 3-state 3.3V output(4) (user and dedicated I/Os)
Voltage applied to 3-state 2.5V or below output (user and dedicated I/Os)
Storage temperature (ambient)
Maximum soldering temperature(2)
Maximum junction temperature(2)
–0.5 to 1.1
V
–0.5 to 3.0
V
–0.5 to 3.75
V
–0.5 to 4.05
V
–0.5 to 3.75
V
–0.75 to 4.05
V
–0.95 to 4.4
(Commercial Temperature)
–0.85 to 4.3
V
(Industrial Temperature)
–0.75 to VCCO + 0.5
V
±100
mA
±100
mA
–0.75 to 4.05
V
–0.75 to VCCO + 0.5
V
–65 to 150
°C
+220
°C
+125
°C
Notes:
1. Stresses beyond those listed under Absolute Maximum Ratings might cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those listed under Operating Conditions is not implied. Exposure to Absolute
Maximum Ratings conditions for extended periods of time might affect device reliability.
2. For soldering guidelines, refer to UG112: Device Package User Guide. For thermal considerations, refer to UG195: Virtex-5 FPGA Packaging and
Pinout Specification on the Xilinx website.
3. 3.3V I/O absolute maximum limit applied to DC and AC signals.
4. For 3.3V I/O operation, refer to UG190: Virtex-5 FPGA User Guide, Chapter 6, 3.3V I/O Design Guidelines.
5. For more flexibility in specific designs, a maximum of 100 user I/Os can be stressed beyond the normal specification for no more than 20% of a data period.
© 2006–2010 Xilinx, Inc. XILINX, the Xilinx logo, Virtex, Spartan, ISE, and other designated brands included herein are trademarks of Xilinx in the United States and other
countries. PowerPC is a trademark of IBM Corp. and is used under license. PCI, PCI Express, PCIe, and PCI-X are trademarks of PCI-SIG. All other trademarks are the property
of their respective owners.
DS202 (v5.3) May 5, 2010
www.xilinx.com
Product Specification
1