XA-SPARTAN-6 Datasheet, PDF (1/10 Pages) –

10
DS170 (v1.3) December 13, 2012
XA Spartan-6 Automotive FPGA
Family Overview
Product Specification
General Description
The Xilinx Automotive (XA) Spartan®-6 family of FPGAs provides leading system integration capabilities with the lowest total cost for high-
volume automotive applications. The ten-member family delivers expanded densities ranging from 3,840 to 101,261 logic cells and faster,
more comprehensive connectivity. Built on a mature 45 nm low-power copper process technology that delivers the optimal balance of cost,
power, and performance, the XA Spartan-6 family offers a new, more efficient, dual-register 6-input look-up table (LUT) logic and a rich
selection of built-in system-level blocks. These include 18 Kb (2 x 9 Kb) block RAMs, second generation DSP48A1 slices, SDRAM
memory controllers, enhanced mixed-mode clock management blocks, SelectIO™ technology, power-optimized high-speed serial
transceiver blocks, PCI Express® compatible Endpoint blocks, advanced system-level power management modes, auto-detect
configuration options, and enhanced IP security with AES and Device DNA protection. These features provide a low-cost programmable
alternative to custom ASIC products with unprecedented ease of use. XA Spartan-6 FPGAs offer the best solution for flexible and scalable
high-volume logic designs, high-bandwidth parallel DSP processing designs, and cost-sensitive applications where multiple interfacing
standards are required. XA Spartan-6 FPGAs are the programmable silicon foundation for Targeted Design Platforms that deliver
integrated software and hardware components that enable designers to focus on innovation as soon as their development cycle begins.
Summary of XA Spartan-6 FPGA Features
• XA Spartan-6 Family:
• XA Spartan-6 LX FPGA: Logic optimized
• XA Spartan-6 LXT FPGA: High-speed serial connectivity
• Automotive Temperatures:
• I-Grade: Tj = –40°C to +100°C
• Q-Grade: Tj = –40°C to +125°C
• Automotive Standards:
• Xilinx is ISO-TS16949 compliant
• AEC-Q100 qualification
• Production Part Approval Process (PPAP) documentation
• Beyond AEC-Q100 qualification is available upon request
• Designed for low cost
• Multiple efficient integrated blocks
• Optimized selection of I/O standards
• Staggered pads
• High-volume plastic wire-bonded packages
• Low static and dynamic power
• 45 nm process optimized for cost and low power
• Hibernate power-down mode for zero power
• Suspend mode maintains state and configuration with multi-
pin wake-up, control enhancement
• High performance 1.2V core voltage (LX and LXT FPGAs, -2
and -3 speed grades)
• Multi-voltage, multi-standard SelectIO interface banks
• Up to 1,080 Mb/s data transfer rate per differential I/O
• Selectable output drive, up to 24 mA per pin
• 3.3V to 1.2V I/O standards and protocols
• Low-cost HSTL and SSTL memory interfaces
• Hot swap compliance
• Adjustable I/O slew rates to improve signal integrity
• High-speed GTP serial transceivers in the LXT FPGAs
• Up to 3.2 Gb/s
• High-speed interfaces including: Serial ATA and PCI Express
• Efficient DSP48A1 slices
• High-performance arithmetic and signal processing
• Fast 18 x 18 multiplier and 48-bit accumulator
• Pipelining and cascading capability
• Pre-adder to assist filter applications
• Integrated Memory Controller blocks
• DDR, DDR2, DDR3, and LPDDR support
• Data rates up to 800 Mb/s
• Multi-port bus structure with independent FIFO to reduce
design timing issues
• Abundant logic resources with increased logic capacity
• Optional shift register or distributed RAM support
• Efficient 6-input LUTs improve performance and minimize
power
• LUT with dual flip-flops for pipeline centric applications
• Block RAM with a wide range of granularity
• Fast block RAM with byte write enable
• 18 Kb blocks that can be optionally programmed as two
independent 9 Kb block RAMs
• Clock Management Tile (CMT) for enhanced performance
• Low noise, flexible clocking
• Digital Clock Managers (DCMs) eliminate clock skew and
duty cycle distortion
• Phase-Locked Loops (PLLs) for low-jitter clocking
• Frequency synthesis with simultaneous multiplication,
division, and phase shifting
• Sixteen low-skew global clock networks
• Simplified configuration, supports low-cost standards
• 2-pin auto-detect configuration
• Broad third-party SPI (up to x4) and NOR flash support
• MultiBoot support for remote upgrade with multiple
bitstreams, using watchdog protection
• Enhanced security for design protection
• Unique Device DNA identifier for design authentication
• AES bitstream encryption in the XA6SLX75, XA6SLX75T,
and XA6SLX100 devices
• Integrated Endpoint block for PCI Express designs (LXT)
• Low-cost PCI® technology support compatible with the 33 MHz,
32- and 64-bit specification.
• Faster embedded processing with enhanced, low cost,
MicroBlaze™ 32-bit soft processor
• Industry-leading IP and reference designs
• Strong automotive-specific third-party ecosystem with IP,
development boards, and design services
© Copyright 2010–2012 Xilinx, Inc. Xilinx, the Xilinx logo, Artix, ISE, Kintex, Spartan, Virtex, Vivado, Zynq, and other designated brands included herein are trademarks of Xilinx
in the United States and other countries. PCI, PCI Express, PCIe, and PCI-X are trademarks of PCI-SIG. All other trademarks are the property of their respective owners.
DS170 (v1.3) December 13, 2012
www.xilinx.com
Product Specification
1