DS191 Datasheet, PDF (1/85 Pages) Xilinx, Inc – DC and AC Switching Characteristics

DS191 (v1.17) November 24, 2015
Zynq-7000 All Programmable SoC
(Z-7030, Z-7035, Z-7045, and Z-7100):
DC and AC Switching Characteristics
Product Specification
Introduction
The Zynq®-7000 All Programmable SoCs are available in
-3, -2, -2LI, -1, and -1LQ speed grades, with -3 having the
highest performance. The -2LI devices operate at
programmable logic (PL) V_CCINT/V_CCBRAM = 0.95V and are
screened for lower maximum static power. The speed
specification of a -2LI device is the same as that of a
-2 device. The -1LQ devices operate at the same voltage
and speed as the -1Q devices and are screened for lower
power. Zynq-7000 device DC and AC characteristics are
specified in commercial, extended, industrial, and
expanded (Q-temp) temperature ranges. Except the
operating temperature range or unless otherwise noted, all
the DC and AC electrical parameters are the same for a
particular speed grade (that is, the timing characteristics of
a -1 speed grade industrial device are the same as for a -1
speed grade commercial device). However, only selected
speed grades and/or devices are available in the
commercial, extended, or industrial temperature ranges.
All supply voltage and junction temperature specifications
are representative of worst-case conditions. The
parameters included are common to popular designs and
typical applications.
The available device/package combinations are outlined in:
• Zynq-7000 All Programmable SoC Overview (DS190)
• Defense-grade Zynq-7000Q All Programmable SoC
Overview (DS196)
• XA Zynq-7000 All Programmable SoC Overview
(DS188)
This Zynq-7000 AP SoC data sheet, which covers the
specifications for the XC7Z030, XA7Z030, XQ7Z030,
XC7Z035, XC7Z045, XQ7Z045, XC7Z100, and XQ7Z100
complements the Zynq-7000 AP SoC documentation suite
available on the Xilinx website at www.xilinx.com/zynq.
DC Characteristics
Table 1: Absolute Maximum Ratings ⁽¹⁾
Symbol
Description
Processing System (PS)
V_CCPINT
V_CCPAUX
V_CCPLL
V_{CCO_DDR}
V_{CCO_MIO(2)}
V_PREF
V_{PIN(2)(3)(4)(5)}
PS internal logic supply voltage
PS auxiliary supply voltage
PS PLL supply
PS DDR I/O supply
PS MIO I/O supply
PS input reference voltage
PS MIO I/O input voltage
PS DDR I/O input voltage
Programmable Logic (PL)
V_CCINT
V_CCBRAM
V_CCAUX
V_CCO
V_{CCAUX_IO(4)}
PL internal supply voltage
PL supply voltage for the block RAM memories
PL auxiliary supply voltage
PL output drivers supply voltage for HR I/O banks
PL output drivers supply voltage for HP I/O banks
Auxiliary supply voltage
Min
Max
Units
–0.5
–0.5
–0.5
–0.5
–0.5
–0.5
–0.40
–0.55
1.1
V
2.0
V
2.0
V
2.0
V
3.6
V
2.0
V
V_{CCO_MIO} + 0.55 V
V_{CCO_DDR} + 0.55 V
–0.5
1.1
V
–0.5
1.1
V
–0.5
2.0
V
–0.5
3.6
V
–0.5
2.0
V
–0.5
2.06
V
© Copyright 2012–2015 Xilinx, Inc. Xilinx, the Xilinx logo, Zynq, Virtex, Artix, Kintex, Spartan, ISE, Vivado and other designated brands included herein are trademarks of Xilinx
in the United States and other countries. AMBA, AMBA Designer, ARM, Cortex-A9, CoreSight, Cortex, PrimeCell, ARM Powered, and ARM Connected Partner are trademarks
of ARM Ltd. All other trademarks are the property of their respective owners.
DS191 (v1.17) November 24, 2015
Product Specification
www.xilinx.com
Send Feedback
1