78438334056 Datasheet, PDF (4/7 Pages) Wurth Elektronik GmbH & Co. KG, Germany. – WE-MAIA SMD Power Inductor

Packaging Specification - Tape and Reel: [mm]
P0
D0
P2
A0
D1
P1
End
Feeding direction
T
B
C
top cover
tape
T1
K0
T2
Start
Carrier tape
Cover tape
W3
W1
close to center
W2
No Component
min. 40mm
Components
No component
min. 20mm
Cover Tape
min. 400mm
packaging is reffered to the international standard IEC 60286-3:2013
tolerance
size
A0 B0 W
P1 T
T1 T2 D0
typ. typ. ±0,1 ±0,1 ±0,1 max. typ. +0,1/ -0,0
3012 3,50 3,50 12,00 8,00 0,30 0,10 2,00 1,50
E1 E2
±0,1 min.
1,75 10,25
F
±0,05
5,50
P0 P2
±0,1 ±0,05
4,00 2,00
Tape Type
Polystyrene
VPE / packaging unit
pcs.
1000
tolerance
Tape width
12 mm
A
±2,0
178,00
BC
min. ±0,8
1,50 13,00
D
min.
20,20
N
±2,0
50,00
W1
+1,5
12,40
W2
max.
18,40
W3
min.
11,90
W3
max.
15,40
165° - 180°
Tape width
12 mm
Pull-of force
0,1 N - 1,3 N
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. [phone] - 0
www.we-online.com
[e-mail]
CREATED
KaS
CHECKED
BMoe
GENERAL TOLERANCE
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
WE-MAIA SMD Power Inductor
ORDER CODE
78438334056
SIZE
3012
REVISION
001.004
STATUS
Valid
DATE (YYYY-MM-DD)
BUSINESS UNIT
PAGE
2017-04-17
eiSos
4/7
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.