74479276124_17 Datasheet, PDF (4/7 Pages) Wurth Elektronik GmbH & Co. KG, Germany. – WE-PMCI Power Molded Chip Inductor

Packaging Specification - Tape and Reel: [mm]
P0
A
D0
P2
A
End
D1
A0
P1
Feeding direction
K0
T
W3
W1
B
close to center
Top Cover
Tape
T1
T2
C
W2
Start
Carrier Tape
Cover Tape
No Component
min.160mm
Components
No Component
min.100mm
Cover Tape
min. 400mm
packaging is reffered to the international standard IEC 60286-3:2013
tolerance
size
A0 B0 W
typ. typ. +0,3/ -0,1
0806 1,9 2,3 8
T T1 T2 K0 P0 P1 P2 D0
max. max. typ. typ. ±0,1 ±0,1 ±0,05 +0,1/ -0,0
0,25 0,1 1,3 1,2 4,00 4,00 2,00 1,50
D1 E1 E2 F
Tape Type 2a
min. ±0,1 min. ±0,05
0,3 1.75 6,25 3,5 Polystyrene
VPE / packaging unit
pcs.
3000
tolerance
Tape width
8 mm
A
±2,0
178,00
B
C
D
N
W1 W2 W3 W3
min. ±0,8 min. ±2,0 +1,5 max. min. max.
1,50 13
20.2 50
8.4 14.4 7.9 10.9
165° - 180°
Tape width
8 mm
Pull-of force
0,1 N - 1,0 N
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. [phone] - 0
www.we-online.com
[e-mail]
CREATED
KaS
CHECKED
DDe
GENERAL TOLERANCE
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
WE-PMCI Power Molded Chip
Inductor
ORDER CODE
74479276124
SIZE
0806
REVISION
001.001
STATUS
Valid
DATE (YYYY-MM-DD)
BUSINESS UNIT
PAGE
2017-03-09
eiSos
4/7
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.