744916047 Datasheet, PDF (3/6 Pages) Wurth Elektronik GmbH & Co. KG, Germany. – WE-KI HC SMD High Current Wire Wound Ceramic Inductor

P0
D0
P2
A0
P1
End
Feeding direction
T3
T
B
C
Start
top cover
tape
T1
K0
Carrier tape
Cover tape
W3
W1
close to center
W2
No Component
min. 160 mm
Components
Packaging is referred to the international standard IEC 60286-3; 2013
No Component
min. 100 mm
Cover Tape
min. 400 mm
tolerance
size
A0 B0 W
P1 T
typ. typ. ±0,1 ±0,1 typ.
0402 0.75 1.32 8
2
0.8
T1
D0
E1
E2
F
G
P0 P2
Tape VPE / packaging unit
max. +0,1 ±0,1 min. ±0,05 min. ±0,1 ±0,05
pcs.
0.1 1.5 1.75 6.25 3.5
2
4
2
Paper 5000
tolerance
Tape width
A
B
C
D
N
W1 W2 W3 W3
±2,0 min. ±0,8 min. min. +1.5 max. min. max.
8 mm 178 1.5 13
20.2 50 8.4 14.4 7.9 10.9
165° - 180°
Tape width
8 mm
Pull-of force
0,1 N - 1,0 N
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. [phone] - 0
www.we-online.com
[e-mail]
CREATED
KaS
CHECKED
HBH
GENERAL TOLERANCE
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
WE-KI HC SMD High Current Wire
Wound Ceramic Inductor
ORDER CODE
744916047
SIZE
0402
REVISION
001.000
STATUS
Valid
DATE
BUSINESS UNIT
PAGE
2015-11-10
eiSos
3/6
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.