173010542 Datasheet, PDF (23/24 Pages) Wurth Elektronik GmbH & Co. KG, Germany. – Continuous output power: 3.3W or 5W

WPMDH1100xx1S / 173010x42
MagI³C Power Module
FDSM – Fixed Step Down Regulator Module
DOCUMENT HISTORY
Revision
1.0
Date
June 2016
Description
Final version
Comment
CAUTIONS AND WARNINGS
The following conditions apply to all goods within the product series of MagI³C of
Würth Elektronik eiSos GmbH & Co. KG:
General:
All recommendations according to the general technical specifications of the data-sheet have to be complied with.
The usage and operation of the product within ambient conditions which probably alloy or harm the component surface has to
be avoided.
The responsibility for the applicability of customer specific products and use in a particular customer design is always within
the authority of the customer. All technical specifications for standard products do also apply for customer specific products.
Residual washing varnish agent that is used during the production to clean the application might change the characteristics of
the body, pins or termination. The washing varnish agent could have a negative effect on the long term function of the product.
Direct mechanical impact to the product shall be prevented as the material of the body, pins or termination could flake or in
the worst case it could break. As these devices are sensitive to electrostatic discharge customer shall follow proper IC Handling
Procedures.
Customer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related
requirements concerning its products, and any use of Würth Elektronik eiSos GmbH & Co. KG components in its applications,
notwithstanding any applications-related information or support that may be provided by Würth Elektronik eiSos GmbH & Co.
KG. Customer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences lessen the likelihood of failures that
might cause harm and take appropriate remedial actions. Customer will fully indemnify Würth Elektronik eiSos and its
representatives against any damages arising out of the use of any Würth Elektronik eiSos GmbH & Co. KG components in
safety-critical applications.
Product specific:
Follow all instructions mentioned in the datasheet, especially:
 The solder profile has to comply with the technical reflow or wave soldering specification, otherwise this will void the
warranty.
 All products are supposed to be used before the end of the period of 12 months based on the product date-code.
 Violation of the technical product specifications such as exceeding the absolute maximum ratings will void the warranty.
 It is also recommended to return the body to the original moisture proof bag and reseal the moisture proof bag again.
 ESD prevention methods need to be followed for manual handling and processing by machinery.
we-online.com
© June 2016
Würth Elektronik eiSos GmbH & Co. KG – Data Sheet Rev. 1.0
23/24