748323155 Datasheet, PDF (2/3 Pages) Wurth Elektronik GmbH & Co. KG, Germany. – Bandpass-Filter WE-BPF

Spezifikation für Freigabe / specification for release
Kunde / customer :
Artikelnummer / part number :
748323155
Bezeichnung : Bandpassfilter WE-BPF
description : Bandpass-Filter WE-BPF
LF
RoHS compliant
DATUM / DATE : 2004-10-11
H Lötpadempfehlung / solder pads:
1.30
* Line width should be designed to
match 50Ω characteristic impedance,
depending on PCB material and thickness
0.80
*
1.00
*
0.35
Solder Resist
Land
Through-hole (Ø 0.35)
1.40 _1.00
1
No.
4
2
1
2
3
K Messdiagramm/ measuring diagram:
units: mm
Terminal Name
GND
OUT
No.
Terminal Name
3
GND
4
IN
Port 1
(50 Ω)
Network
Analyzer
Port 2
(50 Ω)
Attenuation and Return Loss (dB)
0
GND
I/0
I/0
GND
10
20
30
40
50 ₀
2
4
6
8
10
12
Frequency (GHz)
S21 in dB
S11 in dB
S22 in dB
This electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as
aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where
higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body. In addition, even electronic component in general electronic equipments, when us
electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before use. It is essential to give consideration
when to install a protective circuit at the design stage
Würth Elektronik eiSos GmbH & Co.KG
D-74638 Waldenburg · Max-Eyth-Str. 1 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400
http://www.we-online.de
SEITE 2 VON 3