885012209019 Datasheet, PDF (1/6 Pages) Wurth Elektronik GmbH & Co. KG, Germany. – WCAP-CSGP Ceramic Capacitors

A Dimensions: [mm]
B Recommended land pattern: [mm]
C Schematic:
D1 Electrical Properties:
Properties
Test conditions
Value Unit Tol.
Capacitance 1±0.2 Vrms, 1 kHz ±10% C 100000 pF ± 10%
Rated voltage
UR
25 V (DC) max.
Dissipation factor 1±0.2 Vrms, 1 kHz ±10% DF ≤ 3.5%
typ.
Isolation Resistance Apply UR for 120 s max. RIso
≥5
GΩ
Precondition for Class II MLCC measurement: Apply a preheat treatment @150±10°C for 1 hour. The measurement
should be applied after 24±2 hrs the part was stored under ambient conditions. There is not any precondition necessary
for Class I MLCC.
E General information:
General Purpose MLCC
Ceramic Type:
X7R Class II
Temperature Coeffecient: ± 15% max.
Storage Conditions:
35°C, <45% RH
Operating Temperature:
-55 °C bis +125 °C
Dielectric Strength:
General Test conditions:
5 sec. @250% UR; Charge & Discharge Current < 50mA
25°C, 30-70% RH; if not specified differently
FIT according to
separate documentation
DESCRIPTION
L ± 0.3
W ± 0.2
H ± 0.1
E ± 0.25
l
p
w
3.2
2.5
WCAP-CSGP Ceramic Capacitors
0.95
Würth Elektronik eiSos GmbH & Co. KG
0.75
EMC & Inductive Solutions
Max-Eyth-Str. 1
4.00
74638 Waldenburg
Germany
Order.- No.
SIZE
2.20
2.50
1.0
2014-11-06
SSt
Tel. [phone] - 0
PSL
www.we-online.com
[e-mail]
885012209019
A4
REV
DATE
BY
CHECKED
Size: 1210
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use.
Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before
the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.