824501281 Datasheet, PDF (1/7 Pages) Wurth Elektronik GmbH & Co. KG, Germany. – WE-TVSP Power TVS Diode

Dimensions: [mm]
1,14 ±0,38
5,11 ±0,2
4,24 ±0,26
Recommended Land Pattern: [mm]
6,50
1,90 2,30
Electrical Properties
Properties
Test conditions
Value Unit Tol.
DC Operating Voltage
V_DC
28
V
max.
(Reverse) Breakdown Voltage 1 mA
V_BR 32.75
V
±5%
Clamping Voltage
I_PEAK
V_CLAMP 45.4
V
max.
(Reverse) Peak Pulse Current 10/ 1000 µs
I_PEAK
8.8
A
max.
Leakage Current
V_DC
I_LEAK
1
μA
max.
Steady State Power Dissipation T_A = 50 °C
Power Dissipation ¹⁾
10/ 1000 µs
P_DISS
3.3
W
max.
P_DISS
400
W
max.
1) _{Mounted on 5.0 mm x 5.0 mm (0.03 mm thick) Copper Pads to each terminal}
Schematic:
Scale - 6:1
General Information
Properties
Value
It is recommeded that the temperature of the component does not exceed +150°C under worst
case conditions
Operating Temperature
Storage Temperature (in original
packaging)
T_OP
-65 °C up to +150 °C
T_S
-40 °C up to +60 °C
Test conditions of Electrical Properties: 20°C, 33% RH if not specified differently
Scale - 6:1
Product Marking
Marking
YG
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. [phone] - 0
www.we-online.com
[e-mail]
CREATED
WE
CHECKED
WE
GENERAL TOLERANCE
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
WE-TVSP Power TVS Diode
SIZE
DO-214AC
REVISION
001.000
STATUS
Draft
ORDER CODE
824501281
DATE
BUSINESS UNIT
PAGE
2015-11-05
eiSos
1/7
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.