744830017132 Datasheet, PDF (1/5 Pages) Wurth Elektronik GmbH & Co. KG, Germany. – WE-CMBHV Common Mode Power Line Choke

Dimensions: [mm]
1
2
4
3
25,0 ±0,5
40,0 max.
7,0 min.
O 1,5 typ.
Recommended Hole Pattern: [mm]
O 2,0
4
3
1
2
25,0
Electrical Properties:
Properties
Test conditions
Inductance
10 kHz/ 0.1 mA
L
Rated Current
@ 70 °C
I_R
DC Resistance
@ 20 °C
R_DC
Rated Voltage
50 Hz
U_R
Insulation Test Voltage 50 Hz/ 5 mA/ 2 sec. U_T
Value
2x1.7
13.2
2x10
760
3000
Unit Tol.
mH ±30
A max.
mΩ max.
V (AC) max.
V (AC)
Schematic:
11
2₂
Scale - 1:1,5
Scale - 1:1
General Information:
It is recommeded that the temperature of the component does not exceed +125°C under worst
4
case conditions
Storage Temperature (in
original packaging)
3
Operating Temperature
-20 °C up to +60 °C
-40 °C up to +125 °C
Temperature Rise < 55K
Test conditions of Electrical Properties: +20°C, 33% RH if not specified differently
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. [phone] - 0
www.we-online.com
[e-mail]
CREATED
KaS
CHECKED
HasA
GENERAL TOLERANCE
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
WE-CMBHV Common Mode Power
Line Choke
ORDER CODE
744830017132
SIZE
REVISION
STATUS
XL
001.000
Valid
DATE
BUSINESS UNIT
PAGE
2015-11-10
eiSos
1/5
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.