7448052303 Datasheet, PDF (1/5 Pages) Wurth Elektronik GmbH & Co. KG, Germany. – WE-CMBNC Common Mode Power Line Choke Nanocrystalline

Dimensions: [mm]
1
2
4
3
25 ±0,5
36 max.
2 ref.
Recommended Hole Pattern: [mm]
25
4
3
1
2
Electrical Properties:
Properties
Inductance
Rated Current
DC Resistance
Rated Voltage
Insulation Test Voltage
Test conditions
10 kHz/ 0.1 mA
L
@ 70 °C
I_R
R_DC
50 Hz
U_R
50 Hz/ 5 mA/ 2 sec. U_T
Value
2x3
23
2x3
250
1500
Unit Tol.
mH +50/-30
A max.
mΩ max.
V (AC) max.
V (AC)
Schematic:
11
2₂
Scale - 1:1,5
Scale - 1:1,5
General Properties:
It is recommeded that the temperature of the component does not exceed +125°C under worst
4
case conditions
Storage Temperature (in original
packaging)
3
Operating Temperature
-20 °C up to +60 °C
-40 °C up to +125 °C
Temperature Rise < 55K
Test conditions of Electrical Properties: +20°C, 33% RH if not specified differently
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. [phone] - 0
www.we-online.com
[e-mail]
CREATED
KaS
CHECKED
HasA
GENERAL TOLERANCE
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
WE-CMBNC Common Mode Power
Line Choke Nanocrystalline
ORDER CODE
7448052303
SIZE
REVISION
STATUS
XL
001.003
Draft
DATE
BUSINESS UNIT
PAGE
2016-10-11
eiSos
1/5
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.