74479977124 Datasheet, PDF (1/5 Pages) Wurth Elektronik GmbH & Co. KG, Germany. – WE-PMMI Power Multilayer Metal-Alloy Inductor

Dimensions: [mm]
0,5 ±0,3
+0,3
2,0 -0,1
Recommended Land Pattern: [mm]
0,8 ~ 1,2
0,8 ~ 1,2
Electrical Properties
Properties
Test conditions
Inductance
1 MHz/ 5 mA
L
Rated Current
ΔT = 20 K
I_{R 1}
Rated Current
ΔT = 40 K
I_{R 2}
Saturation Current
|ΔL/L| < 30%
I_SAT
DC Resistance
R_DC
DC Resistance
R_DC
Self Resonant Frequency
f_res
Version
Low Profile
Value
0.24
1700
2400
3500
35
43
36
Unit
Tol.
μH
±20%
mA
typ.
mA
typ.
mA
typ.
mΩ
typ.
mΩ
max.
MHz
min.
Schematic:
Scale - 15:1
General Information
It is recommeded that the temperature of the component does not exceed +125°C under worst
case conditions
Operating Temperature
Storage Temperature (in original
packaging)
T_OP
-40 °C up to +125 °C
T_S
-20 °C up to +40 °C
Test conditions of Electrical Properties: 20°C, 33% RH if not specified differently
Scale - 15:1
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. [phone] - 0
www.we-online.com
[e-mail]
CREATED
KaS
CHECKED
DDi
GENERAL TOLERANCE
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
WE-PMMI Power Multilayer
Metal-Alloy Inductor
SIZE
0806
REVISION
001.000
STATUS
Draft
ORDER CODE
74479977124
DATE
BUSINESS UNIT
PAGE
2016-02-19
eiSos
1/5
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.