744761087C Datasheet, PDF (1/1 Pages) Wurth Elektronik GmbH & Co. KG, Germany. – Ceramic-SMD-Inductor WE-KI

Spezifikation für Freigabe / specification for release
Kunde / customer :
Artikelnummer / part number :
744761087C
LF
Bezeichnung :
description :
Keramik-SMD-Induktivität WE-KI
Ceramic-SMD-Inductor WE-KI
A Mechanische Abmessungen / dimensions:
DATUM / DATE : 2006-10-16
Größe / size 0603C
B
C
F
A
A
1,65 ± 0,2
mm
B
1,15 ± 0,2
mm
C
0,9 ± 0,2
mm
D
0,5 ref.
mm
F
0,30 ± 0,1
mm
H
0,762
mm
I
0,625
mm
J
0,65
mm
D
B Elektrische Eigenschaften / electrical properties:
Eigenschaften / Testbedingungen /
properties
test conditions
Induktivität /
inductance
250 MHz
L
Wert / value
8,7
Güte Q /
Q factor
250 MHz
Q
28
DC-Widerstand /
DC-resistance
R_DC
0,10
Nennstrom /
rated current
T = 15 K
I_DC
700
Eigenres.-Frequenz /
self-res.-frequency
SRF
4600
Einheit / unit
nH
mA
MHz
tol.
±5%
min.
max.
max.
min.
C Lötpad / soldering spec.:
H
I
J
I
D Prüfgeräte / test equipment:
Agilent 4287A + HP 16193A für/for L und/and Q
HP 4338B für/for R_DC
HP 4285A + 42841A + 42842C + 42851-6110 für/for I_DC
ENA 5071B für/for SRF
F Werkstoffe & Zulassungen / material & approvals:
Basismaterial / base material:
Kontaktmaterial / contact plating:
Keramik/ ceramic
Mo/Mn + Ni + Au
E Testbedingungen / test conditions:
Luftfeuchtigkeit / humidity:
Umgebungstemperatur / temperature:
60 70%
25°C
G Eigenschaften / general specifications:
Umgebungstemperatur / ambient temperature: -40°C ~ + 110°C
Betriebstemperatur / operating temperature:
Lagerbedingungen / storage conditions:
-40°C ~ +125°C
-10°C ~ + 40°C
30 ~ 70% RH
Freigabe erteilt / general release:
Kunde / customer
..................................................................................
Datum / date
..................................................................................
Unterschrift / signature
Würth Elektronik
..............................................................
Geprüft / checked
..................................................................^S..^k.^l.^e..
Kontrolliert / approved
Name
Version 1
Änderung / modification
06-11-27
Datum / date
This electronic component has been designed and developed for usage in general electronic equipment. Before incorporating this component into any equipment where higher safety and
reliability is especially required or if there is the possibility of direct damage or injury to human body, for example in the range of aerospace, aviation, nuclear control, submarine,
transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc, Würth Elektronik eiSos GmbH must be
informed before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that
require high safety and reliability functions or performance.
Würth Elektronik eiSos GmbH & Co. KG
D-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400
http://www.we-online.com
SEITE 1 VON 1