744761033A Datasheet, PDF (1/1 Pages) Wurth Elektronik GmbH & Co. KG, Germany. – Spezifikation für Freigabe / specification for release

Spezifikation für Freigabe / specification for release
Kunde / customer :
Artikelnummer / part number :
744761033A
Bezeichnung :
description :
Keramik-SMD-Induktivität WE-KI
Ceramic-SMD-Inductor WE-KI
A Mechanische Abmessungen / dimensions:
LF
RoHS compliant
DATUM / DATE : 2004-10-11
Größe / size 0603
B
C
F
A
A
1,6 ± 0,2
mm
B
1,05 ± 0,2
mm
C
1,05 ± 0,2
mm
D
0,5 ref.
mm
F
0,35 ± 0,1
mm
H
1,0
mm
I
0,625
mm
J
0,65
mm
D
B Elektrische Eigenschaften / electrical properties:
Eigenschaften /
properties
Induktivität /
inductance
Testbedingungen /
test conditions
250 MHz
L
Wert / value
3,3
Güte Q /
Q factor
250 MHz
Q
22
Güte Q /
Q factor
900 MHz
Q
63
DC-Widerstand /
DC-resistance
R_DC
0,06
Nennstrom /
rated current
∆T = 15 K
I_DC
700
Eigenres.-Frequenz /
self-res.-frequency
SRF
5800
Einheit / unit
nH
Ω
mA
MHz
tol.
±0,2nH
min.
typ.
max.
max.
min.
C Lötpad / soldering spec.:
H
I
J
I
D Prüfgeräte / test equipment:
Agilent 4287A + HP 16193A für/for L und/and Q
HP 4338B für/for R_DC
HP 4285A + 42841A + 42842C + 42851-6110 für/for I_DC
ENA 5071B für/for SRF
F Werkstoffe & Zulassungen / material & approvals:
Basismaterial / base material:
Kontaktmaterial / contact plating:
Keramik/ ceramic
Mo/Mn + Ni + Au
E Testbedingungen / test conditions:
Luftfeuchtigkeit / humidity:
Umgebungstemperatur / temperature:
60 … 70%
25°C
G Eigenschaften / general specifications:
Umgebungstemperatur / ambient temperature: -40°C ~ + 110°C
Betriebstemperatur / operating temperature: -40°C ~ +125°C
Lagerbedingungen / storage conditions: -10°C~ + 40°C
30 ~ 70% RH
Freigabe erteilt / general release:
Kunde / customer
.........................................................................
Datum / date
................................................................................
Unterschrift / signature
Würth Elektronik
.....................................................
Geprüft / checked
.......................................................... ^AWe
Kontrolliert / approved
Name
Version 1
Änderung / modification
04-10-11
Datum / date
This electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such
as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information
network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body. In addition, even electronic component in general
electronic equipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed
before use. It is essential to give consideration when to install a protective circuit at the design stage
Würth Elektronik eiSos GmbH & Co. KG
D-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400
http://www.we-online.com
SEITE 1 VON 1