744290103 Datasheet, PDF (1/6 Pages) Wurth Elektronik GmbH & Co. KG, Germany. – WE-UCF SMD Common Mode Line Filter

Dimensions: [mm]
10
1
6
5
16,6 ±0,4
Recommended Land Pattern: [mm]
17,6
2,8
6
5
10
1
Electrical Properties:
Properties
Inductance
Rated Current
DC Resistance
Leakage Inductance
Insulation Test Voltage
Rated Voltage
Test conditions
10 kHz/ 50 mV L
ΔT = 40 K
I_R
@ 20 °C
R_DC
1 MHz/ 1 mA
L_S
50 Hz
U_T
U_R
Value
2x10
0.5
2x0.92
83000
500
80
Unit Tol.
mH ±30
A max.
Ω max.
nH typ.
V (AC) max.
V
14 ±0,1
Schematic:
11
2₅
Scale - 1,5:1
Scale - 1,5:1
General Properties:
10
It is recommended that the temperature of the component does not exceed +125°C under worst
case conditions
Ambient Temperature (refering to
6
I_R)
-40 °C up to +85 °C
Operating Temperature
-40 °C up to +125 °C
Storage Conditions
-20 °C up to +40 °C, < 75% RH
Test conditions of Electrical Properties: +20°C, 33% RH if not specified differently
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. [phone] - 0
www.we-online.com
[e-mail]
CREATED
KaS
CHECKED
SBa
GENERAL TOLERANCE
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
WE-UCF SMD Common Mode Line
Filter
ORDER CODE
744290103
REVISION
STATUS
DATE (YYYY-MM-DD)
BUSINESS UNIT
PAGE
001.001
Expires on 2017-04-30 due to PCN 2015-11-10
eiSos
1/6
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.