744212510 Datasheet, PDF (1/6 Pages) Wurth Elektronik GmbH & Co. KG, Germany. – WE-SL1 SMD Common Mode Line Filter

A Dimensions: [mm]
B Recommended land pattern: [mm]
C Schematic:
D Electrical Properties:
Properties
Test conditions
Inductance
100 kHz/ 100 mV
L
Impedance
Zmax
Rated current
∆T = 20 K
IR
DC Resistance
RDC
Insulation test voltage
UT
Rated voltage
UR
Value
2x 51
300
300
0.16
250
80
Unit
µH
Ω
mA
Ω
V (AC)
V
Tol.
±50%
typ.
max.
max.
max.
E General information:
It is recommended that the temperature of the part does not exceed 105°C
under worst case operating conditions.
Ambient temperature: -40°C to +85°C (refering to IR)
Operating temperature: -40°C to +105°C
Storage temperature (on tape & reel): -20°C to +40°C; 75% RH max.
Test conditions of Electrical Properties: 20°C, 33% RH
if not specified differently
DESCRIPTION
8.3
2012-09-18
SSt
SBa
Würth Elektronik eiSos GmbH & Co. KG
8.2
2012-09-12
SSt
SBa
EMC & Inductive Solutions
Max-Eyth-Str. 1
8.1
2012-07-17
SSt
SSt
74638 Waldenburg
8.0
2012-07-17
SSt
Germany
SBa
Tel. [phone] - 0
7.0
2010-11-03
SBa
www.we-online.com
[e-mail]
REV
DATE
BY
CHECKED
WE-SL1 SMD Common Mode Line Filter
Order.- No.
SIZE
744212510
A4
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use.
Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before
the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.