742861210 Datasheet, PDF (1/6 Pages) Wurth Elektronik GmbH & Co. KG, Germany. – WE-CBF HF SMD EMI Suppression Ferrite Bead (High Frequency)

A Dimensions: [mm]
B Recommended land pattern: [mm]
C Schematic:
D Electrical Properties:
Properties
Test conditions
Value
Unit
Impedance @ 100 MHz 100 MHz
Z
1000
Ω
Impedance @ 1 GHz
1 GHz
Z
1100
Ω
Maximum impedance
550 MHz
Z
2200
Ω
Rated current
DC Resistance
ΔT = 20K
IR
50
mA
RDC
1.80
Ω
Type
Wide Band
Tol.
±25%
min.
typ.
max.
max.
E General information:
Do not use this part beyond the Rated Current, as this will create
excessive heat and can harm the component
Storage Temperature (on Tape & Reel): -20°C to +60°C
Operating Temperature: -55°C to +125°C
Test conditions of Electrical Properties: 20°C, 33% RH
if not specified differently
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
3.2
2012-09-27
SSt
SMu
EMC & Inductive Solutions
Max-Eyth-Str. 1
3.1
2012-06-27
SSt
SSt
74638 Waldenburg
3.0
2012-03-29
SSt
Germany
SMu
Tel. [phone] - 0
2.0
2009-08-13
SMu
-
www.we-online.com
[e-mail]
REV
DATE
BY
CHECKED
WE-CBF HF SMD EMI Suppression Ferrite
Bead (High Frequency)
Order.- No.
SIZE
742861210
A4
Size: 0603
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use.
Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before
the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.