74279220601 Datasheet, PDF (1/6 Pages) Wurth Elektronik GmbH & Co. KG, Germany. – WE-MPSB EMI Multilayer Power Suppression Bead

Dimensions: [mm]
0,5 ±0,3
2,0 ±0,2
Recommended Land Pattern: [mm]
W
1,2
WIDE BAND / HIGH SPEED: W = 3,0
HIGH CURRENT:
W = 4,0
Electrical Properties:
Properties
Test conditions
Impedance @ 100 MHz 100 MHz
Z
Maximum Impedance 108 MHz
Z
Rated Current
DC Resistance
DC Resistance
Type
ΔT = 40 K
I_R
R_DC
R_DC
High Current
Value
600
551
2100
43
80
Unit Tol.
Ω ±25%
Ω typ.
mA max.
mΩ typ.
mΩ max.
Schematic:
Scale - 15:1
General Information:
Do not use this part constantly beyond the Rated Current, as this will create excessive heat and can
harm the component
Storage Temperature (in
original packaging)
-20 °C up to +60 °C
Operating Temperature
-55 °C up to +125 °C
Test conditions of Electrical Properties: 20°C, 33% RH if not specified differently
Scale - 15:1
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. [phone] - 0
www.we-online.com
[e-mail]
CREATED
MHB
CHECKED
MHB
GENERAL TOLERANCE
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
WE-MPSB EMI Multilayer Power
Suppression Bead
ORDER CODE
74279220601
SIZE
0805
REVISION
001.000
STATUS
Draft
DATE
BUSINESS UNIT
PAGE
2015-11-10
eiSos
1/6
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.