74271622 Datasheet, PDF (1/4 Pages) Wurth Elektronik GmbH & Co. KG, Germany. – STAR-GAP Snap Ferrite for RF applications

A Dimensions: [mm]
B Applicable Cable Diameter: [mm]
D Electrical Properties:
Properties
Test conditions
Impedance @ 25 MHz 1 turn
25 MHz
Z
Impedance @ 25 MHz 2 turns
25 MHz
Z
Impedance @ 100 MHz 1 turn 100 MHz
Z
Impedance @ 100 MHz 2 turns 100 MHz
Z
Impedance @ 200 MHz 1 turn 200 MHz
Z
Impedance @ 200 MHz 2 turns 200 MHz
Z
Impedance @ 300 MHz 1 turn 300 MHz
Z
Impedance @ 300 MHz 2 turns 300 MHz
Z
Impedance @ 500 MHz 1 turn 500 MHz
Z
Impedance @ 500 MHz 2 turns 500 MHz
Z
Value Unit Tol.
35
Ω ±25%
135
Ω ±25%
140
Ω ±25%
640
Ω ±25%
200
Ω ±25%
1400
Ω
±25%
300
Ω ±25%
1900
Ω
±25%
400
Ω ±25%
830
Ω ±25%
E General information:
Storage Temperature (before assembly): 0°C to +40°C
Operating Temperature: -25°C to +105°C
Test conditions of Electrical Properties: 20°C, 33% RH
if not specified differently
Additional Features
Safety key to lock/ unkock
74271
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
5.1
2012-06-27
SSt
SSt
74638 Waldenburg
5.0
2012-04-30
SSt
Germany
SMu
Tel. [phone] - 0
4.0
2010-05-19
SMu
-
www.we-online.com
[e-mail]
REV
DATE
BY
CHECKED
DESCRIPTION
STAR-GAP Snap Ferrite for RF applications
Order.- No.
SIZE
74271622
A4
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use.
Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before
the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.