465031772505 Datasheet, PDF (1/1 Pages) Wurth Elektronik GmbH & Co. KG, Germany. – WS-PBTU Push Button Switch, Right angle type, THT version

5,08
2,54
0,6
12 3
EPOXY SEAL
3,3
7
0,4 5,9 3,1
9,8
6
0,3
0,7
Scale - 2:1
P.C.B. MOUNTINGPLAN
2,54
12 3
O _{0,8 x5}
5,08
SCHEMATIC
2 (COM)
1
3
(non-shorting)
SPECIFICATION
>Rating :
>Contact Resistance :
Initial :
After Life Test :
>Insulation Resistance :
>Dielectric Strength :
>Total-Travel :
>Bounce :
>Switch function :
>Actuator function :
0.4VA maximum @ 28V AC/DC maximum
(Applicable Range 0.1mA ~ 0.1A @ 20mV ~28V)
50mΩ max.
500mΩ max.
min. 500MΩ at 500VDC
500VAC for 1 minute
1.1 ±0.2mm
10 ms
momentary
Auto-return
MATERIAL
>Bracket :
>Cover :
>Actuator :
>Contact :
>Terminal :
>Spring :
Copper Alloy with Tin
PA66 UL 94 V-0, color Black
POM UL HB, color White
Copper Alloy with Silver
Copper Alloy with Gold
Steel
SOLDERING INFORMATION
>Terminal in THT version
>Wave soldering 260°C 10sec. max
>Hand soldering under 350°C for 3sec. max
ENVIRONMENTAL
Storage condition :
Operation condition :
Compliance :
-40°C ~ +85°C
-40°C ~ +85°C
ROHS, Reach
PACKAGING INFORMATION
> Tray
Part number
465 031 772 505
Force
250g ± 100g
Switching function
ON - ON
Schematic
SPDT
Life Cycle
30.000
Würth Elektronik eiSos GmbH & Co. KG
EMC & Innductive Solutions
CREATED
DaF
CHECKED
JLi
GENERAL TOLERANCE
DIN ISO 2768-1m
PROJECTION
METHOD
SIZE
A4
b
a
REV.
Spring: Carbon Steel; Switching function
Contact: Copper Alloy with Silver; Schematic
FILE
2015-03-23 DaF
2015-03-17 DaF
DATE
BY
Max-Eyth-Str. 1
74638 Waldenburg
Germany
com. [phone] - 0
www.we-online.de
[e-mail]
DESCRIPTION
WS-PBTU
Push Button Switch,
Right angle type, THT version
SIZE
STATUS
9.8*18.5*6.3mm
Released
TECHNICAL REFERENCE
_________
ORDER CODE
465031772505
DATE
2015-02-09
BUSINESS UNIT
SWITCH
PAGE
1 /1
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use.
Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before
the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.