440XX67082622 Datasheet, PDF (1/2 Pages) Wurth Elektronik GmbH & Co. KG, Germany. – WS-TATL 12x12mm Tact Switch with integrated LED, THT version

12,0
0,8
5,08
10,16
11,0
Polarity Mark
(Cathode)
1
2
0,8
5,08
10,16
5,08
3
2
B
A
4
1
P.C.B. MOUNTING PLAN
Switch
A
B
CIRCUIT DIAGRAM
LED SCHEMATIC
3
4
TECHNICAL CHARACTERISTICS
SPECIFICATION
>Rating:
50mA, 12VDC
>Contact Resistance:
Initial:
100mOHM max.
After Life Test:
2OHM max.
>Insulation Resistance: min. 100MOHM at 500VDC
>Dielectric Strength:
500VAC for 1 minute
>Stroke:
0.3 ± 0.1 mm
>Bounce
10ms max.
MATERIAL
>Diffuser plate:
>Actuator:
>Frame:
>Contact:
>Terminal:
>Rubber:
PC UL HB
PA66 UL HB
PA66 UL HB, color Black
Stainless Steel with Ag
Brass with Ag
Silicone
SOLDERING INFORMATION
>Terminal in THT version
>Wave soldering 260°C 10 sec. max.
>Hand soldering under 350°C for 3 sec. max
ENVIRONMENTAL
>Storage condition: -40°C ~ +85°C, 60% RH max.
>Operation condition: -40°C ~ +85°C
>Compliance:
ROHS, Reach
HANDLING ADVISE
>ESD prevention methods need to be applicated for manual
handling
and processing by machinery
>Resistors for protection are obligator
PACKAGING INFORMATION
>ESD Tray
Scale - 2:1 PN
Force
Color of LED
Life cycle
This electronic component is designed and developed with the intention
for use in general electronics equipments.
Before incorporating the components into any equipments in the field
such as aerospace, aviation, nuclear control, submarine, transportation,
(automotive control, train control, ship control), transportation signal,
disaster prevention, medical, public information network etc. where
higher safety and reliability are especially required or if there is possibility
of direct damage or injury to human body, Wurth Elektronik must be
asked for a written approval.
In addition, even electronic component in general electronic equipments,
when used in electrical circuits that require high safety, reliability
functions or performance, the sufficient reliability evaluation-check for the
safety must be performed before by the user before usage.
Projection
GENERAL TOLERANCE
.x = +/- 0,2
.xx = +/- 0,15
Date
Drawn 13-10-02
Checked 13-10-02
Name
Fandrey
Hsu
b revised MatchCode 14-07-28 AL
a Bounce 10ms max. 14-04-14 DaF
REV FILE
DATE BY
WE _{Würth Elektronik}
eiCan
CAD ^eiCan
EDV NO440xx67082622.dft
440 RS670 82622
440 GS670 82622
440 BS670 82622
440 YS670 82622
220g ± 50gf
220g ± 50gf
220g ± 50gf
220g ± 50gf
Basic material
Red
Green
Blue
Yellow
100.000
100.000
100.000
100.000
DESCRIPTION
WS-TATL 12x12mm Tact Switch with integrated LED, THT version
Scale
2:1
Position
Drawing.- No. _{440xx67082622}
System :Solid Edge V20
SIZE
A4